Official Raise3D Community

It is only 3mil thick. Does it cause impressions like the Buildtak? 3mil is only on the first page.... at the bottom of that listing are the links to successive pages where you can see they can supply up to 40mil thick PEI sheets. Have you tried to print flex material on PEI? Sorry, I have not. Not...

The PEI from CSHyde comes with adhesive pre-applied to the PEI, making it Much easier to install on the glass, and has an option for smooth or stippled surface (I prefer the latter). http://catalog.cshyde.com/viewitems/3d-printing-materials/ultem-pei? It is only 3mil thick. Does it cause impression...

That's good to hear.... I'm hoping there will be more than just the one reviewer who will come out with a review, but that's a good start.

Now I search good PVA for the Pro2 Plus, any recommendations for manufacturers and settings ?? Just to clarify, are you looking for flexible filament? Or are you looking for support filament? As pointed out earlier in this thread, PVA is a soluble support filament and is not flexible. If you're loo...

Raise3D .... Errors, Fails, Problems and no test videos ...... I hope my pre-order of the Pro2 was not a mistake :-( I'm not sure what errors, fails, or problems you're referring to as I've been following information on the Pro2 closely and have not seen any reports of anything so far. But also as ...

What we need here is for you as a company to be more transparent. Look at how Prusa handle cunstomer support and give updates in progress and development. Set a deadline. Tell us about the deadline. Keep the deadline. That’s how easy it is. But don’t keep us in the dark. Ahem... just for the sake o...

I pre-ordered the Pro2 and haven't seen very many reviews. I am hoping I made the right choice. Everything I've seen thus far has basically been regurgitation of Raise3D's press release, some of it verbatim. The only video I've seen of worth is the Matterhackers preview video... there is another pr...

https://www.walmart.com/ip/Wisamic-PEI-Sheet-254mm-x-224mm-with-3M-Adhesive-Tape-Pre-applied-for-PRUSA-I3-MK2s-Ultem-1000-Thickness-0-25mm-Amber/808518124?wmlspartner=wlpa&selectedSellerId=3417&adid=22222222227153000595&wl0=&wl1=g&wl2=c&wl3=264580260437&wl4=pla-437322926...

Aside from Matterhackers, are there possibly other review units being distributed to some of the bigger and more trusted names in 3D printing on the internet? 3D Printing Nerd? Thomas Sanladerer? Maker's Muse? Just naming a few I know of (there are a lot more I know... forgive me if I left someone o...

I just had a crazy question that was mostly spun from the Matterhackers video that was posted here in the thread. In that video, the castle they printed apparently took 15 days. So out of curiosity, is it possible for the Pro2 printers especially (since it has a filament sensor) to have the option w...

From our tests, we think that mechanical pre-calibration is more reliable than electronic system. Once the calibration is achieved, the flatness will be more accurate which will result in a higher quality of the printed models. So, about the bed leveling system, is it similar to the one found on th...

Since my city is in the opposite coast as Raise3D and the new Canadian reseller, the only advantage buying from the new reseller is that the transportation cost within Canada is cheaper. Since it is new, nobody knows how they will treat their customers. The former reseller (now fired) did not want ...

Hello everyone! Long time listener, first time caller. I'm not yet a Raise3D owner, but I've been lurking on these forums for almost a year gathering info on Raise3D's printers for the time I would one day own one myself. At any rate, I got pretty excited when I read about the new Pro2 & Pro2 Pl...