Search found 8 matches

by harrelsontrumpets
Fri Dec 28, 2018 11:48 pm
Forum: N Series
Topic: Filament jamming
Replies: 6
Views: 1647

Re: Filament jamming

No worries, the printer is completely unusable. I have a piece of garbage Pro2 Plus that does the EXACT SAME THING. I can load and unload filament just fine, but as soon as I press print, the nozzle jams because the temperature suddenly drops. This happens on both nozzles on my machine. I have liter...
by harrelsontrumpets
Thu Dec 27, 2018 8:47 pm
Forum: N Series
Topic: Filament jamming
Replies: 6
Views: 1647

Re: Filament jamming

I have a piece of garbage Pro2 Plus that does the EXACT SAME THING. I can load and unload filament just fine, but as soon as I press print, the nozzle jams because the temperature suddenly drops. This happens on both nozzles on my machine. I have literally only had one successful print with this mac...
by harrelsontrumpets
Thu Dec 27, 2018 2:17 pm
Forum: Pro2 Series
Topic: Inconsistent Z Axis Homing
Replies: 14
Views: 3427

Re: Inconsistent Z Axis Homing

From 0.008 Inch to 0.013 Inch? Which means it changes from 0.33mm to 0.2mm? Have you see any wiggle on your Z adjusting screw? Or any abnormal will cause the screw changes height easily? Very good, now you can convert from inches to mm! No, there is no play in the Z screw. Could you imagine if I we...
by harrelsontrumpets
Thu Dec 27, 2018 2:14 pm
Forum: Printing Settings
Topic: Cannot print anything
Replies: 5
Views: 1040

Re: Cannot print anything

Both extruders clog immediately after a print begins. Yes, I have unclogged them 37 times and they simply clog again within 5 seconds.

This printer is terrible. Why did I buy it? :(
by harrelsontrumpets
Wed Dec 26, 2018 6:54 pm
Forum: Printing Settings
Topic: Cannot print anything
Replies: 5
Views: 1040

Cannot print anything

I have had my Pro2 Plus machine for one month. In that time, I have only had one print that didn't clog or jam on the first layer. Is there anyone in the Denver area who would repair my almost new machine so that it works properly? I would pay a very fair fee to get this machine running. Otherwise, ...
by harrelsontrumpets
Wed Dec 26, 2018 6:47 pm
Forum: User's Gallery
Topic: Velociraptor
Replies: 9
Views: 2804

Re: Velociraptor

That's amazing. I've had my Pro2 Plus for a month and have had zero successful prints. In fact, my printer will not even produce the first layer on a print even after nearly 40 attempts. I'm ready to sell it and move on. I wonder why your printer works so well and mine doesn't.
by harrelsontrumpets
Wed Dec 19, 2018 2:00 pm
Forum: Pro2 Series
Topic: Issues printing with left hot end print quality- need help leveling both nozzles
Replies: 5
Views: 1139

Re: Issues printing with left hot end print quality- need help leveling both nozzles

The instructions you referenced are 1) poorly written and 2) a very long process for something so simple. Why not design the machine to have an adjustment screw for one of the extruders? Instead, you want to heat, cool, home, adjust, etc... This is a waste of time. I will build an adjustment screw f...
by harrelsontrumpets
Wed Dec 19, 2018 1:55 pm
Forum: Pro2 Series
Topic: Inconsistent Z Axis Homing
Replies: 14
Views: 3427

Re: Inconsistent Z Axis Homing

My Pro2Plus does the same thing. It does not home Z to the same place every time. I'm a machinist and you will have to live with me using inches in my posts despite all the people complaining about the mandatory use of mm here. You people are kind of strange! Yes, using feeler gages, the Z height is...

Go to advanced search