Search found 38 matches

by MBellahcene
Mon Jan 03, 2022 1:21 pm
Forum: Software
Topic: Ideamaker is not fully slicing the model
Replies: 2
Views: 220

Re: Ideamaker is not fully slicing the model

Hi,

It looks like you applied a 3D modifier on it.
When you go out of the slice preview, in model view, do you have some transparent thing ?
Capture d’écran 2022-01-03 à 14.17.38.png


If you get something like the cube in my picture lets remove it.
by MBellahcene
Thu Dec 23, 2021 4:33 pm
Forum: Printing Settings
Topic: help with printing
Replies: 24
Views: 1938

Re: help with printing

Corrado wrote:Unfortunatley now I have another problem!
Which could be the reason of this layer shifting?


Hi,

Your printer looses steps.
You may test reducing the travel speed by 10%.
If it doesn't solve try reducing the accelerations by 10% (Advanced tab in the template, is it enabled ?)
by MBellahcene
Wed Dec 22, 2021 1:35 pm
Forum: Pro2 Series
Topic: Filament Getting stuck after Raft
Replies: 3
Views: 271

Re: Filament Getting stuck after Raft

Hi, The problem is exactly when the raft ends. The speed settings may be the issue. The raft got one, the contour another and the solid infill another. When it ends with the raft it starts with the solid infill, the outer shell or the inner shell. If it's an high speed it may be too much for the ext...
by MBellahcene
Wed Dec 22, 2021 1:22 pm
Forum: User's Gallery
Topic: Epcot Center Model
Replies: 37
Views: 23810

Re: Epcot Center Model

WOW !!!!

You master your printer !
by MBellahcene
Wed Dec 22, 2021 1:18 pm
Forum: Software
Topic: Advanced/ LinearAdance
Replies: 0
Views: 225

Advanced/ LinearAdance

Hi, All Marlin based printers can use the Linear Advance feature if LIN_ADVANCE is enabled in the firmware. It solves some over extrusion issues that leads to bumps at angles. In fact it's really easy to enable it if your printer's firmware is on github like the Creality, Artillery, FLSUN... In my f...
by MBellahcene
Fri Dec 17, 2021 1:28 pm
Forum: Printing Settings
Topic: help with printing
Replies: 24
Views: 1938

Re: help with printing

Hi, In IdeaMaker template you have the cooling tab. In that tab you can define a minimum layer time. If the layer is faster than it Ideamaker will use the cooling and minimal speed settings. https://forum.raise3d.com/download/file.php?mode=view&id=15922 In the IdeaMaker user manual you'll get it...
by MBellahcene
Fri Dec 17, 2021 9:24 am
Forum: Software
Topic: Ideamaker extruding too much with Sidewinder X2
Replies: 8
Views: 1407

Re: Ideamaker extruding too much with Sidewinder X2

Hi, Let's take a look at 3DPrintBeginner Library contribution. I made a list of all the printers he targeted with at least one template and it's anoying ! : Alfawise U30 Anycubic Vyper Artillery Sidewinder x2 Artillery Sidewinder X1 Artillery Genius Artillery Hornet BIQU BX Bluer Plus Creality CR5 P...
by MBellahcene
Fri Dec 17, 2021 8:41 am
Forum: Software
Topic: [BUG] Benchy : Window top should be processed as Bridge.
Replies: 5
Views: 876

Re: [BUG] Benchy : Window top should be processed as Bridge.

Hi, For GapFilling I got 30mm/s and 10mm/s for overhang. This narrow section is processed at 10mm/s : Considered as overhang. Those segments are over a big empty zone and should be considered as bridges. I should send you a copy of the speeds view. The Benchy is really a well known model and it's ea...
by MBellahcene
Fri Dec 17, 2021 8:26 am
Forum: Software
Topic: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode
Replies: 11
Views: 1301

Re: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode

Hi, You're right a bout overriding and it wouldn't be a good solution. Just adding like the other GCode settings already do. The printer's GCode order may be as following: + The header (IdeaMaker version and other stuff) + Printer's Start GCode + Template's StartGCode + Filament's StartGCode + Print...
by MBellahcene
Fri Dec 17, 2021 8:22 am
Forum: Software
Topic: Feature request : Variable speed (overhang)
Replies: 4
Views: 874

Re: Feature request : Variable speed (overhang)

It could be a variable speed computed between 90 and the overhang angle when an option gets checked.
by MBellahcene
Wed Dec 15, 2021 11:02 am
Forum: Software
Topic: Feature request : Variable speed (overhang)
Replies: 4
Views: 874

Feature request : Variable speed (overhang)

Hi, When I print TPU I got really different speed depending it's an overhang or not. It leads to scare when I print a test Benchy at the points where speed changes. Could there be something like a variable overhang speed ? If you got 10mm/s with overhang angle detection at 20° and 30mm/s outer shell...
by MBellahcene
Thu Dec 09, 2021 11:41 pm
Forum: Software
Topic: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode
Replies: 11
Views: 1301

Re: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode

Yes, I forgot the filament's one.
May you add Printer's blocks ?
by MBellahcene
Thu Dec 09, 2021 11:38 pm
Forum: Software
Topic: [BUG] Benchy : Window top should be processed as Bridge.
Replies: 5
Views: 876

Re: [BUG] Benchy : Window top should be processed as Bridge.

Hi,

I don't talk about the whole layer
3 walls and a window top in it.

The 3 walls are OK.
The bug is in the window's top which is in the air with no-bridge handling.

Image
by MBellahcene
Thu Dec 09, 2021 11:33 pm
Forum: Software
Topic: Curling : Overlap compensation setting
Replies: 2
Views: 414

Re: Curling : Overlap compensation setting

Cura isn't so good and if the curling was solved, there were other issues. I trashed it. I searched in the firmware and Marlin provide the M900 Kx linear advance to avoid overextrusion at G1 start or end. I reflashed the printer with LIN_ADVANCE set and it solved the issue. I added the M900 kx in th...
by MBellahcene
Wed Dec 08, 2021 10:53 am
Forum: Software
Topic: Curling : Overlap compensation setting
Replies: 2
Views: 414

Curling : Overlap compensation setting

Hi, To build setting for a filament I slice a 0.3mm layer Benchy In my prints I experience curling but only in the forward zone : where the angle is less than 90° In order to have a good profile for all prints I need to reduce the print speeds to avoid that issue. I used Cura and the Outer/inner wal...
by MBellahcene
Tue Dec 07, 2021 10:03 pm
Forum: Software
Topic: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode
Replies: 11
Views: 1301

Re: Printer settings : Multiline StartOfEndGCode / EndOfStartGCode

Ok What about ordered printer's blocks like the others GCode parts ? + The header (IdeaMaker version and other stuff) + Printer's StartGCode + Template's StartGCode + Printer's End of start GCode + ------ Generated slice ----- + Printer's Beginning of End GCode + Template's EndGCode + Printer's EndG...
by MBellahcene
Mon Dec 06, 2021 8:16 pm
Forum: Printing Settings
Topic: Moving your profile from one computer to another
Replies: 1
Views: 405

Re: Moving your profile from one computer to another

Hi,

Under windows all is saved in
C:\Users\[YOURNAME]\AppData\Local\Raise3D\ideaMaker

In those folders :
filament
pattern
printer
config

Let's try using a copy of all those folders from one computer to the other and you'll get all.
by MBellahcene
Sun Dec 05, 2021 6:59 pm
Forum: Software
Topic: Merry Christma, Ideamaker Dev team !
Replies: 1
Views: 381

Merry Christma, Ideamaker Dev team !

THANK YOU ! I tryed Slic3r, PrusaSlicer, Cura and Simplify 3D and you made a great job ! A slicer that enables to modify Accelerations and jerks over the height. A slicer that handles any setting I want at any level from filament to template to groups or layer heights or even in 3D Modifiers. A SLI...

Go to advanced search