Search found 359 matches

by Steven@Raise3D
Fri Jun 25, 2021 1:50 am
Forum: E2
Topic: Board Error 3030
Replies: 1
Views: 21

Re: Board Error 3030

I keep getting Error 3030: z probe already triggered at start of probing move. I'm not sure how to fix it, is there a mechanical fault or is it a simple adjustment that will fix it. I have included the log file. It sounds like the physical probe may be having issues. I would suggest creating a supp...
by Steven@Raise3D
Fri Jun 25, 2021 1:49 am
Forum: Printing Settings
Topic: Matterhackers Pro Series PLA
Replies: 18
Views: 1919

Re: Matterhackers Pro Series PLA

It works great with this PLA filament at 220C. The suggested printing range for this filament is 200C-220C so it is still in spec. It is just 'odd' that it is so far off a different color filament from same manufacturer. It might be that the different color additives change the material properties ...
by Steven@Raise3D
Fri Jun 25, 2021 1:47 am
Forum: Printing Settings
Topic: ABS print
Replies: 3
Views: 119

Re: ABS print

Would you be able to provide me with the Gcode files from both prints? Hi Pro Raisers, I face some difficulty to print a good part with large size. Need your help and assistant for the setting. Thanks and appreciate if able to solve this Just to clarify the issues that you are referring to are the p...
by Steven@Raise3D
Fri Jun 25, 2021 1:42 am
Forum: E2
Topic: Scratched Y Rods
Replies: 7
Views: 242

Re: Scratched Y Rods

Oops, realized this is posted in an E2 topic. Either way, the cause and repair is the same. The rod failed because the bearing failed. Always replace as a matched set. You’re right, I completely agree! Would you be able to provide the ticket number from when you were speaking to our support staff?
by Steven@Raise3D
Fri Jun 25, 2021 1:41 am
Forum: Pro2 Series
Topic: pro 2 is not extruding
Replies: 8
Views: 699

Re: pro 2 is not extruding

Here are few images. Removed the fans for a better view. WhatsApp Image 2021-06-23 at 12.57.08 PM.jpeg WhatsApp Image 2021-06-23 at 12.57.08 PM (3).jpeg WhatsApp Image 2021-06-23 at 12.57.08 PM (2).jpeg WhatsApp Image 2021-06-23 at 12.57.08 PM (1).jpeg WhatsApp Image 2021-06-23 at 12.57.07 PM.jpeg ...
by Steven@Raise3D
Fri Jun 25, 2021 12:27 am
Forum: Software
Topic: IdeaMaker and the E2 level sensor
Replies: 1
Views: 53

Re: IdeaMaker and the E2 level sensor

I just started using IdeaMaker on my new E2. When I print a long part without a raft, it always starts the print with the bed leveling sensors taking readings where the part will print at. When I print a much larger part that takes up the entire print bed AND use a raft, the print will start every ...
by Steven@Raise3D
Fri Jun 25, 2021 12:14 am
Forum: Pro2 Series
Topic: Clicking sound when moving in X-axis
Replies: 1
Views: 45

Re: Clicking sound when moving in X-axis

Hello all I come here with a problem that has been accuring since my last print. A annoying clicking sound starts making noise whenever the printer moves in the + X-axis, could it be that the bearing has failed? You can find a clip of it in the URL below. https://vimeo.com/565972395 Does anyone kno...
by Steven@Raise3D
Thu Jun 24, 2021 11:51 pm
Forum: General
Topic: printer problem
Replies: 1
Views: 57

Re: printer problem

Michele@85 wrote:hallo everyone, what's the problem in your opinion?


Based on the image it looks like the machine encountered a serial error. Would you be able to provide an image of the exact error that appeared on the screen?
by Steven@Raise3D
Thu Jun 24, 2021 11:50 pm
Forum: E2
Topic: Firmware update
Replies: 2
Views: 57

Re: Firmware update

Someone knows how many time to wait for next firmware update? Thanks Unfortunately, we can not provide a specific date as to when new updates are released. However, please note that our software/firmware developers are always working on implementing new features and bug fixes into future versions o...
by Steven@Raise3D
Tue Jun 22, 2021 12:08 am
Forum: Feature Requests, Ideas, Wishes
Topic: Faster Way to change out a hot end assembly
Replies: 1
Views: 82

Re: Faster Way to change out a hot end assembly

I am finding that it is better to have different hot end assemblies for different materials for a number of reasons. Would be great if I could switch them out quicker. I currently have an N2, a pro, and E2. Just a fast way to get the side fan out of the way would be great. Unfortunately, I can not ...
by Steven@Raise3D
Tue Jun 22, 2021 12:06 am
Forum: Printing Settings
Topic: Rafts and supports for pure nylon
Replies: 3
Views: 121

Re: Rafts and supports for pure nylon

As adhaesive I use a noname-gluestick purchased from Prusa, 3DJAKE Adhesive Spray and 3DLac Spray. All 3 work, but the gluestick gives more consistent results and can be used with the bed in place. What we find to work best with most Nylons is PVP glue stick (Another form of craft store gluestick) ...
by Steven@Raise3D
Tue Jun 22, 2021 12:03 am
Forum: General
Topic: weird banding on some models - advice on how to fix?
Replies: 1
Views: 163

Re: weird banding on some models - advice on how to fix?

The lines that are appearing in your prints could be due to the part wobbling during printing​. This could be an issue between the design of the model and the speed that you are attempting to print at. Reducing the speed could reduce this effect. Another option that may help is to print the model on...
by Steven@Raise3D
Mon Jun 21, 2021 11:57 pm
Forum: Printing Settings
Topic: Heavy TPU roll problem
Replies: 2
Views: 54

Re: Heavy TPU roll problem

Hi, I am using a 1 kg PolyFlex TPU95-HF and it seems like my Pro2+ having difficulties to rotate the roll and since the filament is very flexible, I am having issues. Is there any solution for this? I was thinking of having a ball bearing around the filament spool holder? For larger spools of flexi...
by Steven@Raise3D
Mon Jun 21, 2021 11:50 pm
Forum: Pro2 Series
Topic: Tempered Glass issue
Replies: 4
Views: 162

Re: Tempered Glass issue

Got original glass for Pro2, but at packaging name is Build plate for N2, SKU [S]5.11.00101 in original forum packing. When i open this package, turns out that glass had geometry issues and did not math table correctly. I discussed with reseller and was told that its common known issue, and i can p...
by Steven@Raise3D
Mon Jun 21, 2021 11:45 pm
Forum: Pro2 Series
Topic: pro 2 is not extruding
Replies: 8
Views: 699

Re: pro 2 is not extruding

Thank you for the replies. We tore the top end down once again, and re-adjusted the heat sink on the hot end, cleaned everything out again, and reset the factory settings on the machine. Its running again. Now we know what to and what not to do when cleaning the top end. Thanks again. Hi, I am expe...
by Steven@Raise3D
Mon Jun 21, 2021 11:41 pm
Forum: General
Topic: Build plate Dip
Replies: 1
Views: 46

Re: Build plate Dip

Has anyone had issue with the build plate being slightly warped or dipping in the middle? We've had our Pro2 Plus for just under 2 years and have recently noticed layer height issues on larger prints. While replacing the build surface we thought to check the plate itself and using a metal ruler, we...
by Steven@Raise3D
Mon Jun 21, 2021 11:37 pm
Forum: Software
Topic: The printer is not printing to the center of the table.
Replies: 1
Views: 35

Re: The printer is not printing to the center of the table.

Глупый вопрос, но возникла проблема. При установке модели по центру в слайсера, принтер печатает модель не в центре. В настройках изменения этого параметра не нашел. Помогите советом. Silly question, but there was a problem. When placing a model in the center of the slicer, the printer prints the m...
by Steven@Raise3D
Tue Jun 15, 2021 1:58 am
Forum: Printing Settings
Topic: ABS print
Replies: 3
Views: 119

Re: ABS print

Hi Pro Raisers, I face some difficulty to print a good part with large size. Need your help and assistant for the setting. Thanks and appreciate if able to solve this Just to clarify the issues that you are referring to are the pillowing on the top surfaces of the model as well as the warping/defor...
by Steven@Raise3D
Tue Jun 15, 2021 1:56 am
Forum: Printing Settings
Topic: Matterhackers Pro Series PLA
Replies: 18
Views: 1919

Re: Matterhackers Pro Series PLA

I was able to print a full Bency at 220C, then I tried 215C which did not work. Back at 220C and a second full Benchy print went fine. After that I did two more 3+ hour prints of a small enclosure which also worked fine. In total about 10 hours of printing with this PLA at 220C. I have to admit to ...
by Steven@Raise3D
Tue Jun 15, 2021 1:52 am
Forum: Pro2 Series
Topic: Controlling temperature of the build space by controlling the HEPA-filter fan
Replies: 9
Views: 304

Re: Controlling temperature of the build space by controlling the HEPA-filter fan

I use a Raise3D pro2 with some mods (liquid cooling of hotend and extruder motors, stronger fans, different airflow around the motion controller board, temperature controlled fans in the PSU). The issue is that printing nylon without any added components causes strong warping. I managed to get the ...

Go to advanced search