Search found 6 matches

by mtvision
Tue Feb 12, 2019 7:57 pm
Forum: Printing Settings
Topic: Different speeds with dual prints
Replies: 8
Views: 535

Re: Different speeds with dual prints

Hi Vicky. I have pretty much the same problem but I don't have separate objects which I could pre-group. I want to print TitanX (ABS-blend) @50mm/s with my left extruder and Helios Support @20mm/s with my second extruder. The Helios support is only been used for dense support structures. I'm going t...
by mtvision
Mon Sep 24, 2018 3:47 pm
Forum: General
Topic: Blurred camera images on Pro2+
Replies: 2
Views: 613

Blurred camera images on Pro2+

The camera of my Pro2+ gives blurry images. I'd like to adjust the lens. Does anyone know how to do that? I did not found any instructions yet.
by mtvision
Mon Sep 24, 2018 3:19 pm
Forum: General
Topic: Is the Pro2 Capable of Simultaneous Dual Extrusion (Ditto Mode)?
Replies: 2
Views: 614

Re: Is the Pro2 Capable of Simultaneous Dual Extrusion (Ditto Mode)?

The nozzle switching mechanic does not allow both nozzles to be at the same height.
It would also does not make much sense because the nozzles are just a few millimeters apart. You would only be able to print really tiny parts in ditto mode.
by mtvision
Mon Sep 24, 2018 3:16 pm
Forum: General
Topic: First few layers being compressed on Pro2+
Replies: 3
Views: 922

Re: First few layers being compressed on Pro2+

The issue is independent on material or slicer. I have it with ABS, PLA and PETG. We already tested Slic3r, Simplify3D and of course ideaMaker. I also experimented with Z-Offset in the settings without any luck. Further looks into the print process showed that the effect of this issue starts at a pr...
by mtvision
Thu Sep 13, 2018 2:37 pm
Forum: General
Topic: First few layers being compressed on Pro2+
Replies: 3
Views: 922

First few layers being compressed on Pro2+

We have a brand new Pro2+ and have an issue with the first few layers looking ugly. First of all we are professional users of 3d printers and have alot of experience but never saw things like that on other printers. We have leveled the build plate using the 0.2mm cap feeler. It doesn't matter where ...
by mtvision
Thu Sep 13, 2018 7:36 am
Forum: General
Topic: Issues with the Pro2 Series
Replies: 4
Views: 1098

Re: Issues with the Pro2 Series

2. Nozzle Jumping I had the very same problem with my Pro2+ and it turned out there was a loose connection on the connector on the PCB at the print head. I disconnected all connectors, checked proper cable laying, applied a small amount of contact spray and connected everything again. Now it works ...

Go to advanced search