Search found 33 matches

by SchMax
Fri Nov 30, 2018 10:39 am
Forum: Pro2 Series
Topic: Cables touching Belts
Replies: 5
Views: 489

Cables touching Belts

Hello@all! When i print large prints (30x30cm) cables from the extruder touch the belts on the right side! do other people have this problem too or is this just faulty cable management with my printer? I already solved the Problem by tighten them to the extruder-head with cable ties. Maybe you can t...
by SchMax
Thu Nov 08, 2018 2:10 pm
Forum: Pro2 Series
Topic: Printhead Virbrating
Replies: 5
Views: 587

Re: Printhead Virbrating

heatblock
by SchMax
Thu Nov 08, 2018 11:49 am
Forum: Pro2 Series
Topic: Printhead Virbrating
Replies: 5
Views: 587

Re: Printhead Virbrating

it looks like th nozzle is a little loose but the screws are rally tight..
which screws do i have to tighten??
by SchMax
Thu Nov 08, 2018 9:06 am
Forum: Pro2 Series
Topic: Printhead Virbrating
Replies: 5
Views: 587

Printhead Virbrating

hello@all!

i have a new problem - after a few hours into a print, the printhead starts vibrating and there are wavy patterns in the infill... please help!

i don't know why this happens or what i can do to solve it.

I'm printing with Extrudr PLA 215°C
60°C Heatbed
by SchMax
Wed Oct 24, 2018 5:13 am
Forum: Pro2 Series
Topic: Raise3D Pro2 Clicking, Stops Extruding, Cold-Side Clogs
Replies: 20
Views: 2304

Re: Raise3D Pro2 Clicking, Stops Extruding, Cold-Side Clogs

hello @ all! i now have a very similar problem: a vew hours into a prin, i get a clicking noise from the extruder motor area, and the printer doesn't print anymore. when i pause the print an reload the filament it works fine again.........for like 5-30min..... then it starts clicking again... is the...
by SchMax
Mon Oct 15, 2018 5:20 am
Forum: Pro2 Series
Topic: Filament Stepper Motors very hot - even when not printing with nozzle
Replies: 40
Views: 4659

Re: Filament Stepper Motors very hot - even when not printing with nozzle

you can see it in the pictures how it should be connected.
i just pluged it in, an it worked!

i don't know know, but i guess so..?
by SchMax
Thu Oct 04, 2018 8:13 am
Forum: Printing Settings
Topic: Retraction Settings - Stringing
Replies: 3
Views: 585

Retraction Settings - Stringing

hello@all! today we printed a new model for a client, which had many small details - unfortuenately it had lot of stringing issues.. can anyone tell me what i have to adjust in my print settings, to improve prints with such details in the future? i'm printing with Extrudr PLA - NX-2 white 220° on th...
by SchMax
Thu Sep 27, 2018 5:22 am
Forum: N Series
Topic: New hot end fan necessary - hot end fan installation
Replies: 11
Views: 1033

Re: New hot end fan necessary - hot end fan installation

just phone to OKM3D - they are really kind and helpful! - maybe shipping can be ready faster than 10-20 days..
or maybe they can offer a different solution!
by SchMax
Mon Sep 24, 2018 7:50 am
Forum: Pro2 Series
Topic: Filament Runout Sensor - Response Time?
Replies: 1
Views: 357

Filament Runout Sensor - Response Time?

hello@all! today i intentionally let my printer run out of filament at the start of a big print, just to see how the printer behaves. i noticed a few things: 1) as i was trying to unload the filament, nothing happend - the filament was already unter the gears of the steppermotors! (i had to pull it ...
by SchMax
Mon Sep 24, 2018 5:59 am
Forum: Pro2 Series
Topic: Filament Stepper Motors very hot - even when not printing with nozzle
Replies: 40
Views: 4659

Re: Filament Stepper Motors very hot - even when not printing with nozzle

CV-Gate wrote:@Vicky, I have problems with every filament.
@SchMax, does this work with the Bondtech extruder?


it works fine for my stock pro2 - i don't know if it will work with others..

glueing heatsinks to the motors will work with any printer i think :)
by SchMax
Fri Sep 21, 2018 9:35 am
Forum: Software
Topic: Error in slicing - ArchiCAD->STL->Ideamaker
Replies: 2
Views: 360

Error in slicing - ArchiCAD->STL->Ideamaker

hello@all i found a new re-occuring problem we have with ideamaker when we export STL from Graphisoft ArchiCAD, all looks fine in ideamaker, but when we slice it we get some kind of layer errors. does anyone had that or has a solution? greetings! 1: AC_screenshot.jpg IM_screenshot.jpg sliced_preview...
by SchMax
Fri Sep 21, 2018 5:01 am
Forum: Software
Topic: Print Quality - 1st solid layers on infill
Replies: 10
Views: 988

Re: Print Quality - 1st solid layers on infill

how do you do dense infill?
i only know of dense support?
by SchMax
Thu Sep 20, 2018 6:34 am
Forum: RaiseCloud
Topic: Working with Raisecloud
Replies: 8
Views: 1059

Re: Working with Raisecloud

of course - with that much printers and small batch production all of that makes more sense to me.. are you planning on slicing in raisecloud as well when it improved? because slicing in IM and exporting it to RC seems a bit tedious to me..? :-) as we only print architectural model for presentation ...
by SchMax
Wed Sep 19, 2018 9:11 am
Forum: Software
Topic: Feature Request: Set starting angle for Infill / TopLayer / Support Structures
Replies: 4
Views: 745

Re: Feature Request: Set starting angle for Infill / TopLayer / Support Structures

here the difference it makes

don't mind the colour/extrution difference - i was trying something with 2 different filaments
by SchMax
Wed Sep 19, 2018 7:21 am
Forum: Software
Topic: Feature Request: Set starting angle for Infill / TopLayer / Support Structures
Replies: 4
Views: 745

Feature Request: Set starting angle for Infill / TopLayer / Support Structures

Title: Set starting angle for Infill / TopLayer / Support Structures Description: being able to set an angle for Infill / TopLayer / Support Structures Version: 3.1.7.1850 Operation System: Win10 Reason: We mainly print architectural models the top layers and good looking overhangs are very importan...
by SchMax
Wed Sep 19, 2018 7:03 am
Forum: Pro2 Series
Topic: Filament Stepper Motors very hot - even when not printing with nozzle
Replies: 40
Views: 4659

Re: Filament Stepper Motors very hot - even when not printing with nozzle

i put the amazon link in the post above..

they are very basic aluminium heatsinks - 40x40x11mm
i used a thermal adhesive foil to glue them to the motos (also bought from amazon).
by SchMax
Tue Sep 18, 2018 1:29 pm
Forum: RaiseCloud
Topic: Working with Raisecloud
Replies: 8
Views: 1059

Working with Raisecloud

hello@all! maybe i just don't get it, but i find it very unintuitive working in raisecloud... maybe it's because we only have one raise3D printer, and its much faster just to load the files we want to print directly via ethernet to the printer.. idk.. can other people share how they work with raisec...

Go to advanced search