Search found 27 matches

by simon_srp
Mon May 25, 2020 7:20 am
Forum: Pro2 Series
Topic: Pro2 Plus worth it?
Replies: 4
Views: 288

Re: Pro2 Plus worth it?

We have had issues with our Pro2 Plus since the beginning august 2018. I would not recommend buying this printer. Their support is doing a good job but it has been time differences since i'm living in sweden and their support is somewhere USA or maybe China? So it took some time to get thing done. N...
by simon_srp
Wed May 20, 2020 9:26 am
Forum: Pro2 Series
Topic: Quality problem Pro2 Plus
Replies: 6
Views: 473

Re: Quality problem Pro2 Plus

Vicky@Raise3D wrote:Thanks for sharing your pictures.
Your issue can be related to thermal flutuation. Please open a support ticket at http://help.raise3d.com to get more intensive technical support.


Ok, I will create a ticket.

I also exported the serial log file.

all-raisetouch-960-20200520172345.tar.gz
(556.41 KiB) Downloaded 12 times
by simon_srp
Mon May 18, 2020 9:59 am
Forum: Pro2 Series
Topic: Quality problem Pro2 Plus
Replies: 6
Views: 473

Re: Quality problem Pro2 Plus

Would you like to take some pictures around the printhead so that we can check the wiring? As would you like to help export serial log from your touchscreen? Hi Vicky The serial log I have to export tomorrow since I am working from home today. Here are some pictures around the printhead. Tell me if...
by simon_srp
Thu May 14, 2020 8:34 am
Forum: Pro2 Series
Topic: Quality problem Pro2 Plus
Replies: 6
Views: 473

Re: Quality problem Pro2 Plus

We also printed the Benchy with both right and left nozzle on each side of the printing surface to see if there would be any differences between the nozzles depending on where on the surface we were printing, but no..
by simon_srp
Thu May 14, 2020 8:30 am
Forum: Pro2 Series
Topic: Quality problem Pro2 Plus
Replies: 6
Views: 473

Quality problem Pro2 Plus

Hi everyone At my work we have a Pro2 Plus that we had a lot of trouble with since the beginning. We had two shaft couplers, both motor cables, the extruder and the extruder board and also a thermocoupler changed during 1 ½ year. Not sure if this is normal? I am getting tired of never quite trust th...
by simon_srp
Tue Nov 26, 2019 3:13 pm
Forum: Pro2 Series
Topic: Thinking about bailing on the Pro2Plus.... just cant keep fixing it.
Replies: 12
Views: 3272

Re: Thinking about bailing on the Pro2Plus.... just cant keep fixing it.

I have similar experience as well. We have not had any clogg-issues except when we switched between a "hot" and "cold" PLA materials. Our biggest issue have been that we cant rely on its functionality. From start we had problems with axel couplings that were not correct assembled...
by simon_srp
Wed Jun 05, 2019 6:55 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Oj, det kunde ha slutat ill. Tur att den självdog!

nu väntar vi på reservkabeln. Intressant hur den ska bytas då den sitter inlindad igenom hela kabelkanalen. Hyffsad operation för en sladd ;)
by simon_srp
Mon Jun 03, 2019 7:58 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Uppdatering på mitt extruderproblem!

Det är nu löst, väntar bara på reservdel. Noren, du va nära lösningen. Det va kabel-knas, men inte på den kabeln du nämnde. utan det är på kabeln till motorn. Testade att bara byta kontakterna direkt på motorerna och då började den snurra. :)
by simon_srp
Thu May 30, 2019 9:06 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Tack för tipsen.

Som sagt så får vi se var Raise säger i ärendet. Jag har följt alla deras instruktioner och filmat allt som händer (och inte händer).

Skiftar jag kontakter på motorerna så låser sig ju inte den vänstra, den snurrar på även om den får matning från den högra extruderns strömkälla.
by simon_srp
Wed May 29, 2019 8:58 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Ok, jag tror inget av det är problemet. Motorn får ström men står ändå stilla utan att jag har material i. Det är fritt hela vägen ner till munstycket. Det precis som att motorn har låst sig på något sätt. Jag kan inte ens snurra manuellt på kuggarna. Detta ligger som ärende hos Raise och dom har få...
by simon_srp
Tue May 28, 2019 2:03 pm
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Tjena Vi skrev ut lite med Raise egna material i början. Men våra utskrifter kräver ofta nära 2kg och då behöver vi ha stora rullar :) Tillverkar formlådor till vårt gjuteri i Svedala. Dessa använder dom till att forma sandkärnor. Du är välkommen på studiebesök. Vore trevligt om det går att diskute...
by simon_srp
Tue May 28, 2019 9:32 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Tjena Vi skrev ut lite med Raise egna material i början. Men våra utskrifter kräver ofta nära 2kg och då behöver vi ha stora rullar :) Tillverkar formlådor till vårt gjuteri i Svedala. Dessa använder dom till att forma sandkärnor. Du är välkommen på studiebesök. Vore trevligt om det går att diskuter...
by simon_srp
Fri May 17, 2019 11:08 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Tjena Tack för många tips! Synd att man ska behöva göra så mycket hemma-tricks för att få det att fungera. Men det är bara att ta det för vad det är just nu :) Vi körde med locket av vid senaste printarna pga. att vi satt filamentrullen ovanför skrivaren så tråden matas uppifrån och ner istället för...
by simon_srp
Tue May 07, 2019 7:44 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Vi har kört med primas PLA. Det fungerar bra, vi har lite problem med underextrusion, men vad det exakt beror på vet vi inte ännu. Vi har helt enkelt testat och kört maskinen för lite pga. olika tekniska problem. Vi har även kört deras PLA PRO. Detta tror jag vi kommer köra allt mindre med. Fördelen...
by simon_srp
Mon May 06, 2019 2:05 pm
Forum: Pro2 Series
Topic: Pro2 Plus Layer Shifting and x y Problems
Replies: 4
Views: 944

Re: Pro2 Plus Layer Shifting and x y Problems

We had similar problems with our Pro2 Plus. Our printings were ok from beginning and then they went crazy. After some searching we noticed that one of the axel couplers were loose because a missing set-screw and the other one were loose. Then I noticed that the other coupler also were missing a set-...
by simon_srp
Thu Jan 10, 2019 3:11 pm
Forum: Software
Topic: Problem with corners
Replies: 6
Views: 1066

Re: Problem with corners

And about the corners, you are right. We thougt about it and wondering if there is something to do about it. Like, changing a parameter in IM that adjusts the speed and movement to make the corner sharper. Actually it does not affect the detail that much, we can always sand it to get sharper corners...
by simon_srp
Thu Jan 10, 2019 3:07 pm
Forum: Software
Topic: Problem with corners
Replies: 6
Views: 1066

Re: Problem with corners

Hi Thanks for the feedback. Yes I know, I missed to add support at the edges. But I used normal PLA before and that one you print @ normal speed and temp @ 205-220 then it did not fell down like in this picture. This PLA PRO is a special verison that you can heat treat for extra strenght. So the spe...
by simon_srp
Mon Jan 07, 2019 12:37 pm
Forum: Software
Topic: Problem with corners
Replies: 6
Views: 1066

Re: Problem with corners

Hi Sorry for late post. You know.. Christmas and New Years Eve :) Did not see the attachment-tab so I thought that you had to upload somewhere else and paste a link. But now I will try to attach it instead. See Pic. 1 Printing with Prima Creator PLA Pro @ 120mm/s, Extruder temp @ 255-260°C, Heatbed ...
by simon_srp
Fri Dec 21, 2018 9:42 am
Forum: Software
Topic: Problem with corners
Replies: 6
Views: 1066

Problem with corners

Hi I'm have an issue with printing the corners of my details. They never get sharp. I show you with a picture, maby you know why I get this problem. I need my corners to be sharp and exact since there will be more part who that has to fit togheter. https://www.photobox.co.uk/my/photo/full?photo_id=5...
by simon_srp
Fri Dec 21, 2018 7:57 am
Forum: Others
Topic: Members in Sweden?
Replies: 29
Views: 10463

Re: Members in Sweden?

Vi har ingen tidigare erfarenhet av 3D skrivare så jag kan tyvärr inte säga något om det. Har haft en del strul med vår skrivare. Axelkopplingar som inte satt åtskruvade och saknade varsin set-skruv. Detta ledde till en del smygande problem och tillsist ett haveri. Nu är vi igång och kör igen. Än så...

Go to advanced search