Official Raise3D Community

GT40 wrote:Is there are any solutions? Thanks for any help.

Yes - you need to buy a different brand printer

(...) Anyway. This option might already exist for the Pro3 ? If not, it should be implemented ASAP... I reported an issue in translating in RaiseTouch in Pro2 more than 2 years ago... they didn't do anything so far :D /they have an incorrect translation in the machine, but at the same time, in Idea...

hello, i would like to edit the supports, but if i add it from the button in the upper bar in ideamaker i only have pillars which will end up to be too fragile for tall structures, or too sparse if i increase their size. adding them manually is too time consuming and there's too much guesswork invo...

x belt: https://support.raise3d.com/E2/how-to-replace-the-x-belt-buckle-20-1091.html Yes. I've seen this document. But it is not really a tuning solution. Since it is a 2GT belt, we can shorten the belt by 2mm intervals. And there is a probability that buckle face won't fully press the carriage aft...

I've been using E2 for nearly 2 years. Y and one of the X belts seems to be loosened a bit. I want to tighten them. I couldn't find any information about this practice neither in here https://support.raise3d.com/list.html?cid=20&pid=994 nor in this forum. I checked the assembly and couldn't see...

I have a request, when leaving a print often is made by a set of separate prints. I remove the printed pieces and start again; the point is that it is fine for the nozzle to cool down once finished; it is not okay that the printing bed also does. I need to have the press chamber at constant tempera...

mark_3d wrote:How to pid tuning the buildplate on a Raise printer?

this option doesn't exist ))

there is only PID tuning for hotends

I received these emails from "Raise3D <support@raise3d.freshdesk.com>" about "Pioneering Flexible Manufacturing user activation". I have no idea what "Pioneering Flexible Manufacturing" is, or why I am receiving these emails. They look a lot like phishing emails, becau...

Eric1960 wrote:IdeaMaker Support needed. What I like is to do is change layer hight on a defined layer.

Example
Layer 0-10 layer hight 0.2
Layer 30-50 layer hight 0.3
Layer 100-110 layer hight 0.1

Adaptive layer hight is not an option, for my model.

group and layer settings ->per-layer settings

https://drive.google.com/file/d/1zLF_f3KxIxgUt_Gh82h5y2mokkA9yPIl/view?usp=sharing Now can we PLEASE get a software version that dont have all those ridicilous unnecessary steps every single time you finish a print? It has gone from a super annoying UI feature to a fullblown nightmare as more and m...

(Since there is no RaiseTouch board I thought this was the best place to post) If I manually create a very simple g-code file (like advancing the extruder 20 mm, just to purge mid-air), the printer starts to do some homing and leveling actions. Apparently the RaiseTouch interface does send some stu...

Thanks for your suggestion. We will optimize the Nozzle Selection and Popup Message in future versions. Losing right extruder configuration and switch automatically to slicing with left extruder only seems more like a software bug with ideeaMaker ! When will be Sequential Printing on right extruder...

EricL wrote:Does someone make a powder coated magnetic plate for the E2? The Buildtak is fair to partly cloudy but my other printer runs a powder coated plate and it seems a better base to work from.

is available on aliexpress

I'm having a problem with the Templates. Let's say I have a Standard Quality Template that I have set to the parameters I normally print with using this template. The infill is set to 15%, I want to print a model but I want 50% infill. Click the arrow on the left for slicing the model, here I chang...

When i start a new print job, i go back to one of my old prints (made with succes) to see the slicer settings in the idea file. The filament used etc. But all i get is the settings of the last job. And this print was not necessarily a good print. How do i obtain slicer information from old jobs ? B...

At this time I would ignore this feature as it is still under development. please, stop joking. last update of raisetouch was Aug. 14, 2020 1,5 year ago(!) It's not marked anywhere, that is function not working, or in the tests. It's normal, NOT WORKING function in printer. In Pro2 this "funct...

Tx indeed I expect the same TOP !!!!! the best part: check your belt tension after 300h... and there is no option to change belt tension in pro2/n2 :))) - you can only replace belt, but to do this, you need unscrew top part of printer, because someone forgot to create hole for maintenance belt on l...

Should be similar:
https://support.raise3d.com/Pro2-Series ... 4-932.html

Vicky@Raise3D wrote:Actually you can find it from the left Prepare to slice panel in official versions.

THX ) Updated

There was no info about it in last 2 release notes