Search found 11 matches

by AndyWo
Fri Jun 26, 2020 9:36 am
Forum: Printing Settings
Topic: Z Seam problems
Replies: 3
Views: 302

Re: Z Seam problems

DMP3D wrote:Were you able to improve on this?

I'm printing with a 0.6mm nozzle with PETG too and the seem is quite wide. Trying to figure out how to reduce it?



No, unfortunately I haven't managed it yet...
by AndyWo
Fri Jun 19, 2020 2:10 pm
Forum: Printing Settings
Topic: Automatic Switching extruder (oozing and missing material)
Replies: 8
Views: 499

Re: Automatic Switching extruder (oozing and missing material)

The G Code File with 13.4mb is to large for a upload. I hope the idea File is enough.
by AndyWo
Fri Jun 19, 2020 12:29 pm
Forum: Printing Settings
Topic: Z Seam problems
Replies: 3
Views: 302

Re: Z Seam problems

Here are the files...
by AndyWo
Thu Jun 18, 2020 5:19 pm
Forum: Printing Settings
Topic: Z Seam problems
Replies: 3
Views: 302

Z Seam problems

I'm playing with the z seam, but it looks very bad. Pro2 Plus (Firmware everything up to date), 0,6mm Nozzle, PETG @ 245°C Seam Fixed by X 152,5mm Y 305mm Seam Hiding Convex Corner Testet with Jerk X/Y from 5 to 15 and Printing Acceleration from 500 to 1200... I've also playing with Coasting and Wip...
by AndyWo
Thu Jun 18, 2020 4:59 pm
Forum: Printing Settings
Topic: Automatic Switching extruder (oozing and missing material)
Replies: 8
Views: 499

Re: Automatic Switching extruder (oozing and missing material)

I use absolute extrusion.
When I use the "extra restart option" in the switching section with more then 1mm, now the wipe tower is printed good enough for me.
by AndyWo
Wed Jun 17, 2020 10:27 am
Forum: Printing Settings
Topic: Automatic Switching extruder (oozing and missing material)
Replies: 8
Views: 499

Automatic Switching extruder (oozing and missing material)

Hello, I have problems printing with two different colors. 1. After the automatic switching of the extruder, 10mm is drawn in according to the setting. But material still runs out of about 10mm. I can not imagine that you have to pull in so much material, because this could also clog Coldend. 2. Aft...
by AndyWo
Wed Jun 10, 2020 6:58 am
Forum: Software
Topic: Infill with unnecessary travel move
Replies: 3
Views: 213

Re: Infill with unnecessary travel move

Yes no problem. I hope you can find the issue...
The G-Code file is too large for a upload... I have made a short version...
by AndyWo
Tue Jun 09, 2020 1:23 pm
Forum: Software
Topic: Infill with unnecessary travel move
Replies: 3
Views: 213

Infill with unnecessary travel move

Hello... Can anyone tell me, why the infill isn't printing around?
It stops halfway, then moves to the other corner and then prints the other half of the infill?

I don't have a nice print at PETG, because sometimes printed material is pulled along...
by AndyWo
Tue Jun 09, 2020 10:12 am
Forum: Printing Settings
Topic: Bridging settings for outlines
Replies: 3
Views: 258

Re: Bridging settings for outlines

Ok, that helped. Maybe in the future, you could also color this red like the bridge, then you would recognize it immediately.
by AndyWo
Mon Jun 08, 2020 8:32 pm
Forum: Printing Settings
Topic: Bridging settings for outlines
Replies: 3
Views: 258

Bridging settings for outlines

Hello, my company bought a Raise3d Pro2 Plus printer for me, but I have problems with the bridging settings in ideamaker. In the advanced settings under "other" I have activate the function "apply bridging settings to shells", but the outer lines are not printed as a bridge, only...

Go to advanced search