Search found 159 matches

by Blue21
Tue Feb 08, 2022 7:53 am
Forum: E2
Topic: Powder coated magnetic plate?
Replies: 5
Views: 1848

Re: Powder coated magnetic plate?

There are several, by example: https://www.aliexpress.com/item/4001276056251.html?spm=a2g0o.9042311.0.0.27424c4dYkl92i , currently got it but not tested as I wait my current buildtak plate died. There are 3 types: Smooth/- Textured/Textured Textured/Smooth Each type has a different thickness, so the...
by Blue21
Tue Feb 01, 2022 7:04 am
Forum: Software
Topic: Minor changes to template saving when exiting IM
Replies: 4
Views: 3185

Re: Minor changes to template saving

I think it is just like that and YES, it is really annoying as it can result in stupid mistake.
by Blue21
Fri Jan 21, 2022 5:10 pm
Forum: E2
Topic: E2 overshoot extruder temp. PID not helping
Replies: 3
Views: 5115

Re: E2 overshoot extruder temp. PID not helping

I have redone an auto PID and got only 1-2 °C hysteresis. Parameters: Left, copperhead hotend, 30W heater: 20.17 / 0.78 / 56.12, got 1°C overshoot, reach 200°C in 103 seconds, 250°C in 157s. Right, copperhead hotend, 40W heater: 12.90 / 0.45 / 38.70, got 2°C overshoot, reach 200°C in 69 seconds, 250...
by Blue21
Fri Jan 21, 2022 11:05 am
Forum: E2
Topic: E2 overshoot extruder temp. PID not helping
Replies: 3
Views: 5115

Re: E2 overshoot extruder temp. PID not helping

Hi After replacement of hotend by Copperhead hotend, I got: (PID auto recal at 250°C) What I currently have: Left, copperhead hotend, 30W heater: 18.63 / 0.72 / 56.35, got 1°C overshoot, <timing deleted, see next post> Right, copperhead hotend, 40W heater: 12.64 / 0.45 / 38.59, got 5°C overshoot, <t...
by Blue21
Thu Nov 04, 2021 7:37 am
Forum: E2
Topic: Copperhead Heater Cartridge
Replies: 18
Views: 31387

Re: Copperhead Heater Cartridge

Also very happy with the upgrade after having changed 2 times the Raise3D hot-end with original ones with no improvement to clogging issues, leaks, ... Run it mainly with PTGE and currently have LEFT with original 30W cartridge and RIGHT with 40W. The 40W works as good as the 30W, just reach faster ...
by Blue21
Sat Oct 23, 2021 6:49 am
Forum: E2
Topic: Z Home Gap, better explanation?
Replies: 4
Views: 5976

Re: Z Home Gap, better explanation?

Steven@Raise3D wrote:The Z home gap is the distance between the nozzle and build plate when the Z-axis executes the homing command. We don't recommend that this value be adjusted.


Thanks for the clarification.
by Blue21
Thu Oct 07, 2021 5:21 pm
Forum: E2
Topic: E2-CF print head on E2?
Replies: 20
Views: 20557

Re: E2-CF print head on E2?

So, will there be any kind of upgrade kit if the change is so basic ?
by Blue21
Wed Aug 18, 2021 6:18 am
Forum: E2
Topic: When is next RaiseTouch firmware released? It's been > 1yr
Replies: 3
Views: 1168

Re: When is next firmware released? It's been > 1yr

When will the next firmware come out for the E2? It's been over a year now since the last release... Motion Controller Board Firmware Release Notes E2 Version 0.3.609 – Aug 4, 2021 ;) Thanks for the info. Mine never had shown that a new version is available. Seems I have always to do the update man...
by Blue21
Thu Jul 29, 2021 4:45 am
Forum: E2
Topic: Axis Skipping?
Replies: 4
Views: 1323

Re: Axis Skipping?

From your pictures I would more say under-extrusion. Not a Z shift.
It is hard from the picture to see in 3D if there is a shift on X and/or Y axis, personally I don't really see one but you are better placed with the real object.
by Blue21
Tue Jun 15, 2021 5:12 am
Forum: E2
Topic: Copperhead with E3D Replacement 24v/40w heater heating time test
Replies: 3
Views: 1091

Re: Copperhead with E3D Replacement 24v/40w heater heating time test

Yes, same on mine https://www.3dware.ch/E3D-Heizpatrone-40-Watt---24v-De.htm, red on picture, white delivered. The 30W had red wires.
by Blue21
Mon Jun 14, 2021 7:32 pm
Forum: E2
Topic: Copperhead with E3D Replacement 24v/40w heater heating time test
Replies: 3
Views: 1091

Re: Copperhead with E3D Replacement 24v/40w heater heating time test

Interesting, thanks for sharing. I had changed the left hotend for copperhead after so many clog, leak etc... with a 30W heater to be on the safe side. I had parts also for the right hotend and 40W heater, but I wanted first to get some experience and rebuild confidence in this printer before swappi...
by Blue21
Wed Jun 09, 2021 7:04 am
Forum: Software
Topic: Feature wishes on my E2
Replies: 5
Views: 7328

Re: Feature wishes on my E2

... 3. Delete filament in slicer/printer that is not in use. The filament settings that was there from the start, is not possible to remove. I wish it was possible to remove/hide them so it was easier to find the filament I use. YES, please Raise3D, make it removable, 3mm filaments that stack on to...
by Blue21
Thu May 27, 2021 10:32 pm
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

Just measured the total length of two of my old hot-end and got 33.96 and 33.87 mm. I cleaned the top of the nozzle from the PETG mess of my new hot-end and guess what, the length is 33.91 mm. As it is glued in PETG no way to know if it is loose or not. Happy for you that solution solved the issue b...
by Blue21
Thu May 27, 2021 7:57 am
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

Since you have a second hot end for comparison purposes, --and assuming it operates reliably, why not measure the top-of-throat to tip-of- nozzle and adjust the latest catastrophe accordingly before the next test? Obviously, your last attempts at mating the interior surfaces properly are not workin...
by Blue21
Wed May 26, 2021 5:58 pm
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

My question about the special compound visible on a new hot-end in original topic (still unanswered) is somehow solved, it is useless to help regarding leaks. Brand new hot-end, new noozle, printing PETG. Printed several small parts with no issues and then it was when printing for more than 24 hours...
by Blue21
Fri May 14, 2021 6:25 am
Forum: E2
Topic: Bed Heater power
Replies: 6
Views: 2365

Re: Bed Heater power

Vipao wrote:Thanks Steven. Possible to know wattage please?


If you in any case go for some DIY, will be better to measure it yourselves.
by Blue21
Fri May 14, 2021 6:24 am
Forum: E2
Topic: Bed Heater power
Replies: 6
Views: 2365

Re: Bed Heater power

Steven@Raise3D wrote:
Vipao wrote:Thanks Steven. Possible to know wattage please?


The product page for the machine lists all of its electrical specifications; https://www.raise3d.com/e2/


Except for the heated bed power !
by Blue21
Fri Mar 26, 2021 6:43 am
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

I would suggest creating a support ticket so that one of our technical support engineers can better assist you in solving this issue. I am not located in US, will it be accepted? The previous one I made was rejected as I had to ask my reseller to ask Raise3d for the issue and then it would relay Ra...
by Blue21
Wed Mar 24, 2021 10:54 pm
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

I feel your pain, I was lucky on this one as the print just finished with top surface ironing, maybe the flow was too high and increased the pressure in the hotend at that moment. Yes the procedure is not that clear and I started to write my own so that it can be repeated, including incident repair ...
by Blue21
Wed Mar 24, 2021 4:09 pm
Forum: E2
Topic: Fixation of throat in hotend
Replies: 25
Views: 7374

Re: Fixation of throat in hotend

Update, after purchasing a new right hotend, the left was still working on some print during the rework of the right extruder (just left the thermocouple connected so it didn't goes in error mode). The print finished but there was ongoing same horror issue as I had with the right one, hot filament w...

Go to advanced search