Search found 101 matches

by Blue21
Thu Sep 17, 2020 6:08 am
Forum: Pro2 Series
Topic: Fire safety
Replies: 18
Views: 393

Re: Fire safety

KaneTW wrote:The connection in my printer is fixed at least. Image

It works now, thanks.
by Blue21
Mon Sep 14, 2020 3:09 pm
Forum: Pro2 Series
Topic: Fire safety
Replies: 18
Views: 393

Re: Fire safety

Bitdefender

Infected web page detected
one minute ago

Feature:
Online Threat Prevention

We blocked this dangerous page for your protection:
https://i.kane.cx/
Dangerous pages attempt to install software that can harm the device, gather personal information or operate without your consent.
by Blue21
Mon Sep 14, 2020 3:06 pm
Forum: E2
Topic: Buying Nozzles
Replies: 9
Views: 149

Re: Buying Nozzles

zemlin wrote:
Blue21 wrote:Do you know the exact model of Olsson Ruby compatible with E2 or PRO2 you used?
Nope, because I print with an N2/N2+. Shame on me for not noticing this was in the E2 subforum.

Solex makes ruby nozzles compatible with the Pro.

Thanks, they are available at my reseller.
by Blue21
Sun Sep 13, 2020 2:50 pm
Forum: Printing Settings
Topic: Swiss Cheese Surface
Replies: 4
Views: 96

Re: Swiss Cheese Surface

Seems to me it is not only a problem of top layer from your second picture, side looks also like some Swiss cheese. Is it not a general under-extrusion problem ?
by Blue21
Sun Sep 13, 2020 2:34 pm
Forum: Pro2 Series
Topic: Fire safety
Replies: 18
Views: 393

Re: Fire safety

Should be available now. The datacenter my server is hosted at had a power outage. Rechecked and it is my antivirus that rejected your link (https :// i . kane . cx / fHddVk) as not safe. Maybe better you attach the picture to a post and then insert it in the post as from your link, it don't look l...
by Blue21
Sun Sep 13, 2020 1:24 pm
Forum: E2
Topic: Buying Nozzles
Replies: 9
Views: 149

Re: Buying Nozzles

Been printing a bunch of glass-filled ABS. Compared an A2 hardened nozzle and an Olsson Ruby (both .6mm dia). Ran a bunch of Carbon filled nylon for another job and was doing well with the Ruby on the glass ABS. I tried the A2 nozzle on the glass ABS and got inconsistent prints - seems the nozzle w...
by Blue21
Sat Sep 12, 2020 5:42 am
Forum: Pro2 Series
Topic: Fire safety
Replies: 18
Views: 393

Re: Fire safety

KaneTW wrote:The connection in my printer is fixed at least. Image

Sorry, but your picture cannot be read.
by Blue21
Fri Sep 11, 2020 7:28 pm
Forum: Printing Settings
Topic: How to Reset Z Axis and Resume Printing
Replies: 5
Views: 192

Re: How to Reset Z Axis and Resume Printing

Thanks for the answer.
by Blue21
Thu Sep 10, 2020 5:08 pm
Forum: Printing Settings
Topic: How to Reset Z Axis and Resume Printing
Replies: 5
Views: 192

Re: How to Reset Z Axis and Resume Printing

Ok, you see the future with way to repair the situation. Would be really great as even loosing 1 layer could be probably ok. I already lost 3 print that way. Also an issue when you see it in duplication or mirror mode would be to cancel the failed extruder and keep running the good one, that would r...
by Blue21
Thu Sep 10, 2020 4:41 pm
Forum: Pro2 Series
Topic: Printer smells
Replies: 6
Views: 298

Re: Printer smells

Skyline41rus wrote:I also thought it smelled like a thread, but it turned out that the wires were melting. Check it out! https://forum.raise3d.com/viewtopic.php?f=18\u0026t=20882

Your link is not working.
by Blue21
Thu Sep 10, 2020 2:13 pm
Forum: E2
Topic: Buying Nozzles
Replies: 9
Views: 149

Re: Buying Nozzles

My understanding from https://www.raise3d.com/products/v3-brass-nozzle-0-4mm-pro2-series-printer-only/ and some threads is that what nozzle is compatible to PRO2 should work with E2. I planned to buy this one: https://www.3djake.com/brozzl/hardened-steel-nozzle-for-the-raise3d-pro2
by Blue21
Thu Sep 10, 2020 7:27 am
Forum: E2
Topic: E2 extruders cables and tubes touch the cover
Replies: 2
Views: 94

Re: E2 extruders cables and tubes touch the cover

1. The guide tube and the cable will rub against the top lid however they will only do so when the printer passes 200mm in Z-height and at the point it can not print for longer than 20 hours. Even with that being said we have tested in an extreme case the filament guide tube as well as the extruder...
by Blue21
Wed Sep 09, 2020 3:11 pm
Forum: Printing Settings
Topic: Printing with spool.works scaffold
Replies: 4
Views: 103

Re: Printing with spool.works scaffold

Michael_3D wrote:When you get an answer to this (assuming you will) would you please pass it on to me. I can subscribe to this board, but I don't know how to subscribe to your question (if possible)

Thanks

Hi

Capture.PNG
by Blue21
Tue Sep 08, 2020 9:18 pm
Forum: E2
Topic: E2 extruders cables and tubes touch the cover
Replies: 2
Views: 94

E2 extruders cables and tubes touch the cover

In reference to "Re-Home XY on Power Failure?" https://forum.raise3d.com/viewtopic.php?f=20&t=20851&p=56729#p56729 I am starting this thread as this seems important for people like me buying the E2 not for PLA but for higher temperature filaments. There are now Z home setting that ...
by Blue21
Tue Sep 08, 2020 7:22 pm
Forum: E2
Topic: Re-Home XY on Power Failure?
Replies: 6
Views: 175

Re: Re-Home XY on Power Failure?

Ok, I will create a new thread about this top Z homing position issue.
by Blue21
Thu Sep 03, 2020 6:37 am
Forum: E2
Topic: Re-Home XY on Power Failure?
Replies: 6
Views: 175

Re: Re-Home XY on Power Failure?

After I changed these settings to their maximum (240 and 239 mm), on the next print I noticed that I cannot close the cover very nicely. The extruders cables and the filaments tubes are out of the printer by about 20-30 mm for the cables and ~50 mm for the tubes. ⋅ The cable will have some...
by Blue21
Wed Sep 02, 2020 5:32 pm
Forum: E2
Topic: Re-Home XY on Power Failure?
Replies: 6
Views: 175

Re: Re-Home XY on Power Failure?

With the latest firmware available in our download center, you can find the settings related to Raise the Z-axis under Advanced Settings. Screenshot_20200901153034.png Hi Vicky, thanks for the info. I noticed that the limit for paused print is 239 mm and the other 2 (stopped and completed) are 240 ...
by Blue21
Wed Sep 02, 2020 5:11 pm
Forum: Software
Topic: Filament Templates
Replies: 2
Views: 91

Re: Filament Templates

by Blue21
Tue Sep 01, 2020 5:34 pm
Forum: E2
Topic: Re-Home XY on Power Failure?
Replies: 6
Views: 175

Re: Re-Home XY on Power Failure?

Hi, the image is missing.
by Blue21
Tue Aug 25, 2020 4:14 pm
Forum: Software
Topic: LOST CONFIG - Please move ideamaker config location to a standard TimeMachine backup location
Replies: 6
Views: 266

Re: LOST CONFIG - Please move ideamaker config location to a standard TimeMachine backup location

I agree with you some times such config on Windows PC is placed not really a normal user area where daily change is expected. You can set (at least on the windows version) with a command line parameter the location of the configuration files. I set mine to a dropbox handled folder so the settings ca...

Go to advanced search