Official Raise3D Community

Hola Marcos, según me informaron la próxima actualización prevista para finales de este mes estará disponible en español. Sobre el manual, lo he traducido a modo personal, está anunciado aquí. Lee la nota de la página 1 del manual. https://drive.google.com/drive/folders/169sB0JvO-_c6_ld_SBFH5UGssTHG...

Thanks Vicky, the representation by color is an approximate value, not the true value. Besides, by pressing the Up-Down keyboard arrows, having the temperature and speed values next to the bar-layer, then at a glance it is easy to see what happens in each layer. I consider is preferably a digital va...

In the same way that the 3D printer show the nozzle temperature of the current layer.
I find it interesting that ideaMaker shows the temperature and printing speed in the preview.
This can help to verify if our 'Per-Layer' configuration is working properly.

An example

I consider DaHai8's proposal interesting

I've done some research on this feature. To avoid the message: https://i.imgur.com/cQJjb8Q.png The value in Infill Extrusion Width Percentage must be equal to Combined Infill Layers x 60 The maximum value of Combined infill layers is 99, which means that it can be maximum Infill Extrusion Width Perc...

I have seen a youtube video where they make 1.5mm wide layers, it is experimental. https://www.youtube.com/watch?v=Tyq3XncDNOM They use very low speed to give time for the filament to melt in the nozzle. It only gives "acceptable" results in 'Spiral vase mode'. :arrow: Experimenting with i...

Thank you very much to all
I am very happy with this news.

Thank you very much to all I am very happy with this news. :D :D --- But his causes that I must review again, the manual translated to 'Español'. Remove the actual sentences in English with their translation. Many expressions such as 'Shell' are very ambiguous in Spanish, even different slicer prog...

I have created a script that when Windows starts, it turns off the Driver. Applications such as SpaceClaim, DesignSpark, Cinema 4D, ... ideaMaker, automatically initialize the driver, not problem When I exit of one application then I click on the shortcut on the desk to turn off the driver. This way...

Manual ideaMaker v4, page 158

Note: Infill Ratio in Per-layer settings and Infill Ratio modifier settings will be ignored if adaptive infill
is enabled

When editing supports only it's possible edit Z-Position and height.
I believe it is essential to be able to move and edit size of the pillar.

El manual en inglés tiene algunos expresiones a las que debo darle un sentido mas sencillo. Probablemente tarde un mes en tenerlo finalizado, sin revisiones. Aunque todos tienen el mismo título, los actualizo un par de veces a la semana. Esperaré a Abril, a ver si para la próxima actualización de id...

My old driver did not accept modifying the movement speed per application
The last driver that my SpacePilot accepts,3DxWare64_v10-4-1. It's possible to do so
Thank you

I think there is no problem in placing your objects vertically, because if the size exceeds the vertical limit of the build surface by just a few millimeters, Then can be possible to insert diagonally one model, not two. It is as simple as turning the model 45º https://i.imgur.com/DFO8BTr.png

I agree with you, ideaMaker is the best slicer software. The ideaMaker General Manager for Europe assures me that they are working on it. I want to believe his words At the moment, I have personally translated the ideaMaker v4.0.1 manual ------------- Estoy de acuerdo contigo, ideaMaker es el mejor ...

I find it interesting to insert in ideaMaker the Function : " Add Label " This label can be, for example 1.6mm (4 layers at 0.4), with the text in gap. This label is joined-associated with the object by two segments, so is easy remove it. The uses of "Add Label" it's tremendously...

In other programs, for example DesignSpark Mechanical 5 it works perfectly. In ideaMaker I have to adjust the SpaceMouse parameters to the maximum. But with these parameters at maximum it is uncontrollable with other applications, because the speed is extremely high. https://i.ibb.co/fC1ZCMr/Space-P...

Manual ideaMaker v4.0.1 en Español : https://drive.google.com/drive/folders/169sB0JvO-_c6_ld_SBFH5UGssTHGXcDT?usp=sharing https://mega.nz/folder/2d4RUK5S#MNt7m896aqeH1x4N2Sv-Pw Serán bienvenidas las sugerencias a mejorar expresiones complejos, giros gramaticales, errores tipográficos, etc... ideaMa...

Thank you Vicky, I hope this comes to fruition

5. Add a chime when print is finished I have solved installing a button via radio: https://es.aliexpress.com/item/32949087408.html I have soldered a normally open reed contact to the doorbell pushbutton contacts In GCode> End GCode: G91; Relative Positioning G1 F3000 E-2; Produces anti-Ooze retract...