Search found 54 matches

by Naser404
Sun Jun 16, 2019 4:11 pm
Forum: Hardware
Topic: Fan Upgrade
Replies: 14
Views: 777

Re: Fan Upgrade

when i first clicked that link i couldn't see the duct, only the L&R mounting Plate. I am already working on replacing the hotends with E3D V6 hotend but re-using their heat block. I am just in the process of reverse eng. their extruder 1st, but it's doable. Their nozzle swap is complicated but ...
by Naser404
Sat Jun 15, 2019 2:20 pm
Forum: General
Topic: 8.5 day, 1242.5 g print - Am I tempting fate? - Questions
Replies: 9
Views: 87

Re: 8.5 day, 1242.5 g print - Am I tempting fate? - Questions

I had a print fail on my Pro cause filament run-out detection didn’t work, what happened was the end of the filament got stuck to the spool and it kept grinding and printed in air. That was with a different brand of PLA, but just a warning. I would be interested to see it run this print without any ...
by Naser404
Sat Jun 15, 2019 6:03 am
Forum: Hardware
Topic: Fan Upgrade
Replies: 14
Views: 777

Re: Fan Upgrade

This is what I really want to get up and running.... I'm pretty sure this 50mm blower can keep the anemic heatsinks cool enough to not need water cooling. Need to set it up and measure the temps on the heatsinks - this thing moves some serious air. https://www.digikey.com/product-detail/en/sunon-fa...
by Naser404
Sat Jun 08, 2019 5:32 pm
Forum: Hardware
Topic: Extruder Jam and stuck fillament Pro2
Replies: 68
Views: 8681

Re: Extruder Jam and stuck fillament Pro2

I too am having jams on my pro 2 and with two machines and not just one. As i mentioned many many times on this forum before this is a common issue and an indication of a flaw in the Pro-2 and Raise need to man up and admit it and also fix the issue. And this will not be fixed with a software update.
by Naser404
Tue Jun 04, 2019 2:59 am
Forum: Pro2 Series
Topic: Questioning Pro2 Product Quality - Ongoing Issues
Replies: 4
Views: 144

Re: Questioning Pro2 Product Quality - Ongoing Issues

Hi Chris, I bought two printer already and have been complaining a week after testing it and the exact same issues your facing and even more, but unfortunately Raise does not want to admit that there are major flaws with the design or are just ignoring them and that's fine but i promise you that the...
by Naser404
Fri May 17, 2019 9:56 am
Forum: Pro2 Series
Topic: Bedplate Leveling
Replies: 5
Views: 229

Re: Bedplate Leveling

Yes, had the same issue with mine after i designed a fixture for my dial too, best is to add a glass bed on top like i did.
by Naser404
Tue May 14, 2019 9:36 pm
Forum: Pro2 Series
Topic: Layer Skipping issues
Replies: 6
Views: 174

Re: Layer Skipping issues

I keep saying it but no one listens, the Pro 2 has major issues to print reliabil, it works sometimes and a lot of other times it has either jams or issues with thermal runaways because of the cables. I too have two machines and it's just a hit and miss, if the issue was with one of them then ill bl...
by Naser404
Wed Apr 10, 2019 4:01 pm
Forum: Pro2 Series
Topic: Make the Pro2 Silent (agian) ;)
Replies: 8
Views: 324

Re: Make the Pro2 Silent (agian) ;)

Thank you very much :) Have you also the Cover, shown on the picture or are you using the attached cover? yeah .. the 35mm Fan is very loud too :( I Think I will handle this, when I modified the PSU and the Controller Board. Sorry i don't have that design anymore as it has been modified already.I h...
by Naser404
Tue Apr 09, 2019 4:38 pm
Forum: Pro2 Series
Topic: Make the Pro2 Silent (agian) ;)
Replies: 8
Views: 324

Re: Make the Pro2 Silent (agian) ;)

Yes they are 92 PWM fans low profile, you can attach them in a push-pull senario if needed. I checked the model number on both fans and downloaded the data sheets(attached) too, they are way to noisy. Here is the stl file for the cover, all you need to do is mirro it for the other side and it fits b...
by Naser404
Mon Apr 08, 2019 4:38 pm
Forum: General
Topic: Is it OK to buy the Pro 2 now?
Replies: 15
Views: 1186

Re: Is it OK to buy the Pro 2 now?

I too would not recommend this printer for its price, it's just un reliable, sometimes it works for 3 days prints other times it fails, read my comments here on the forums and the issues many people were facing.
by Naser404
Mon Apr 08, 2019 4:30 pm
Forum: Pro2 Series
Topic: Make the Pro2 Silent (agian) ;)
Replies: 8
Views: 324

Re: Make the Pro2 Silent (agian) ;)

Hi, I have made all the changes to quiet mine the minute i bought the printer, and as you said its the PSU, very noisy and also the electronic blower fan. I 3d printed a cover with two openings for 120mm Noctua fans, the cover snaps in just like the original but its not long enough as the print bed ...
by Naser404
Fri Feb 22, 2019 4:55 pm
Forum: General
Topic: Anyone have a Raise3D printer?
Replies: 10
Views: 643

Re: Anyone have a Raise3D printer?

There is no printer that you just turn on and crank out prints like an HP LaserJet. You're going to have to invest lots of time learning software and how the whole thing works. -john Try a Prusa MK3 or an ultimaker and you will see how reliable they are but smaller foot prints. But for the money i ...
by Naser404
Fri Feb 22, 2019 2:10 pm
Forum: General
Topic: Anyone have a Raise3D printer?
Replies: 10
Views: 643

Re: Anyone have a Raise3D printer?

Not so happy with mine, i got two of these Pro2 and it does print, but i always get failed prints now and then.
by Naser404
Sun Feb 03, 2019 1:10 am
Forum: General
Topic: "Model out of range" despite being in range
Replies: 3
Views: 323

Re: "Model out of range" despite being in range

i Have the same problem but when using support.
by Naser404
Tue Dec 18, 2018 12:09 pm
Forum: Pro2 Series
Topic: End of roll issue
Replies: 6
Views: 325

Re: End of roll issue

i just remembered here is a video recording, i will check it.
by Naser404
Tue Dec 18, 2018 10:25 am
Forum: Pro2 Series
Topic: End of roll issue
Replies: 6
Views: 325

Re: End of roll issue

I had the same exact issue but mine did eventually park the head and ask for filament replacement and you can see my post here. I did eventually replace the filament and i then realized that it started printing in mid air which means that it only detected filament run out after a couple of layers la...
by Naser404
Mon Dec 17, 2018 12:03 pm
Forum: Pro2 Series
Topic: Raise Pro 2 Plus Filament sensor issue
Replies: 0
Views: 224

Raise Pro 2 Plus Filament sensor issue

I had a 61 hour print running for over 48 hours and i came the next morning and it was asking for filament since it ran out, so i tried removing the small piece of filament stuck at the filament sensor hole since it was kinked and after 20 minutes of opening the sensor and top cover i eventually rep...
by Naser404
Thu Sep 13, 2018 5:51 am
Forum: General
Topic: Issues with the Pro2 Series
Replies: 4
Views: 867

Re: Issues with the Pro2 Series

I have been saying this since we got our printers but Raise just doesn’t want to listen, we got not one but two printers and both have the exact same issues and that’s just an indication of design/software problems. I wish Raise could come forward and say that they know now these problems are real a...
by Naser404
Sun Sep 09, 2018 4:21 pm
Forum: Pro2 Series
Topic: Cold nozzles reading 240° C
Replies: 86
Views: 8070

Re: Cold nozzles reading 240° C

Vicky, you need to stop asking people about material types and gcode etc.. you need to acknowledge the issues constantly reported by all of us Pro users and come up with a fix, and stop asking people to open a ticket, thats valid when one or two people have rare issues, but the same bloody issue rep...
by Naser404
Sun Sep 09, 2018 4:11 pm
Forum: General
Topic: Should we purchase new Pro2 from Raise3d or Vendor?
Replies: 11
Views: 1086

Re: Should we purchase new Pro2 from Raise3d or Vendor?

dont buy this machine, its flawed, dont take my word for it, read the forums, so many people having the exact same issues and Raise tries to blame it on filament types. I bought two Raise Pro2's not one and both have the same issues which obviously says a lot. i swear you will be making the biggest ...

Go to advanced search