Official Raise3D Community

You can try smaller Minimal Part Size value and have Thin Wall Detection disabled.
https://support.raise3d.com/ideaMaker/5 ... 5-436.html

Would you like to share us some .gcode files as example to show the purpose to change temperature during nozzle switch?
If you are only looking for editing codes for temperature you can use PostProcess to replace.

PM sent

Are you looking for placing the Start Points between Inner Shell and Inner Perimeter? Or Outer Shell and Outer Perimeter? Or to be able to place starting point yourself on model with more freedom.

We will add Support for External Command/ External Script in future versions and have them intergated into slicing template so that users dont need to run them separately any more.

The support is still under developing.
In current version of ideaMaker, .idea file has got more information saved, including Per-layer, Per-group settings. You should be able to Export/Import these settings with .idea files.

Material Shrinkage has XYZ direction compensation. Which is going to scale the model according to Material. XY compensation is a hardware compensation which was developed for N series machine calibration. There was no huge Z axis deviation found on N series machines when the feature was developed. S...

If you dont mind help us run a few troubleshooting steps, I will share you a beta version ideaMaker via PM.
Please load this version ideaMaker and connect with ideaMaker to download the Diary files which is .log file under Help- Temporary Folder.

We will optimize in future versions too.

Filament flowrate setting has been there for a while. The original purpose to have it was similar as you had mention to combine most of the related settings to under Filament settings so that the users would be easier to locate. But we found that to print the same filament, the settings can be diffe...

I dont believe we have changed the options to select to be printered with left or right extruder in previous versions of ideaMaker.

You can find Omit RaiseTouch Specified GCode under Printer Settings,
https://support.raise3d.com/ideaMaker/8 ... 5-781.html

Can you try this link (api.raise3d.com) with your browser?
If it doesnt work, please check whether you have enable proxy or not? Please have it disabled and test with different Wi-Fi.

Download link shared via PM. Feel free to check it out when you have a minute.

Eric1960 wrote:Maybe a stupid question, but why is there no Z compensation. My X and Y are prefect due to XY correction in printer setting, and for Z I use scale only Z.
Pls advice

We will open Z axis shrinkage compensation in future versions.

PM sent.

We have received similar issue report before from other users and have generated a beta version with the issue fixed. Not sure whether this is the same issue but if you dont mind to help test the beta version, I can share download link with you.

Would you like to share you .data file, as well as the file exported in Cura -> Save Project with us to compare the settings?

We are running tests with some new options related to material shrinkage. And they wont be just under Filament Settings, but also some of them will be under model Scale panel. nice! thanks for replying so fast! looking forward for the next release The feature is still under testing. May have to go ...

If it is going to be printed out with lower extrusion width as well as lower infill density, it wont be solide enough.