Search found 20 matches

by danielq
Mon Dec 10, 2018 7:20 am
Forum: Printing Settings
Topic: Create Support Interface
Replies: 2
Views: 296

Create Support Interface

Hello Folks,


is there a way to create a "interface" between the support and the part?

Sometimes the support is aligned with the layer it supports, causing an irregular surface.


thanks in advance for all your help
by danielq
Wed Nov 28, 2018 4:18 pm
Forum: RaiseCloud
Topic: Extruder Temperature SetPoint
Replies: 2
Views: 347

Re: Extruder Temperature SetPoint

Sounds Great! thanks !
by danielq
Wed Nov 28, 2018 9:28 am
Forum: RaiseCloud
Topic: Job List locally
Replies: 5
Views: 568

Re: Job List locally

Thats great, the same list is visible also on the printer screen?
by danielq
Tue Nov 27, 2018 2:08 pm
Forum: RaiseCloud
Topic: Job List locally
Replies: 5
Views: 568

Re: Job List locally

Is the print queue visible somewhere?
by danielq
Mon Nov 26, 2018 8:07 am
Forum: RaiseCloud
Topic: Extruder Temperature SetPoint
Replies: 2
Views: 347

Extruder Temperature SetPoint

Hello Dear Raise3D Staff, is the temperature set point visible on the cloud? If I set the temperature on the cloud page before a print I can see it, but if I run a print in all the 3 temp SetPoint (Ext 1, Ext 2 and Bed) appear just a " -- " Thanks in advance for all the great job you are d...
by danielq
Fri Nov 23, 2018 10:45 am
Forum: RaiseCloud
Topic: Job List locally
Replies: 5
Views: 568

Job List locally

Hello Raise3D Community, I'm about to test out the new Raise3D Cloud, and it is really what we were looking for! :D We see that on the cloud you add a "job list" feature, is it just on the cloud, right? is there a way to store it locally on the printer? We have bad internet connection issu...
by danielq
Mon Nov 12, 2018 4:29 pm
Forum: Software
Topic: Update modified parts source file (stl) in IdeaMaker
Replies: 7
Views: 706

Re: Update modified parts source file (stl) in IdeaMaker

This will be very helpful!

Other slicing software do as follow: when I switch the window (after saving the new stl) from the 3d model software to the slicing software,
the slincing software prompt me a question about if I want to update the model or take the old one!
by danielq
Tue Nov 06, 2018 10:57 am
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

Re: deactivate unused extruder

I'm using a PRO2 series, and I manage (with the community help) to set the temp of the unused extruder to 0, in this way it will not preheat.


I just notice that with the new IdeaMaker version (3.3.0) there some new settings on the Temp Tab of the advanced setting? What are they for?
by danielq
Tue Nov 06, 2018 10:51 am
Forum: Printing Settings
Topic: Reduce Raft where not needed
Replies: 5
Views: 912

Re: Reduce Raft where not needed

Noren wrote:There is an option for this. Called keep holes in raft structure. Enable that and the raft will bu beneath your print and 5 mm out to each side.



This is what I was looking for!

The option you are talking about is under the Adhesion Tab (old Raft Tab) right?
by danielq
Tue Nov 06, 2018 10:48 am
Forum: Printing Settings
Topic: Reduce Raft where not needed
Replies: 5
Views: 912

Re: Reduce Raft where not needed

I think sometimes you want exactly that to have maximum adhesion But i get your point! My solution would be ⋅  the option as Raft having it as it is now ⋅  Raft as offset of eg 5mm of the conture as it is done with Brim Is that what your Idea is? I agree on maximum adhesion that...
by danielq
Mon Nov 05, 2018 8:02 am
Forum: Software
Topic: Update modified parts source file (stl) in IdeaMaker
Replies: 7
Views: 706

Re: Update modified parts source file (stl) in IdeaMaker

quite correct, but, I don't want to re-import the new model, but update the old already imported and positioned in ideamaker. This is the actual way: - Create STL from the cad Modelling Software - Import STL in IdeaMaker - Modify of the 3D model e regenerate the STL - Delete the one already in IdeaM...
by danielq
Wed Oct 31, 2018 10:30 am
Forum: Software
Topic: Update modified parts source file (stl) in IdeaMaker
Replies: 7
Views: 706

Re: Update modified parts source file (stl) in IdeaMaker

I mean, if I have an stl imported in ideamaker and I modify that stl file in a 3d modelling software and resave the stl, I would like that Ideamaker told me that the stl (source file) has changed (different last changing date and time from the one already imported) and ask me if I want to upload the...
by danielq
Thu Oct 25, 2018 12:02 pm
Forum: Software
Topic: Update modified parts source file (stl) in IdeaMaker
Replies: 7
Views: 706

Update modified parts source file (stl) in IdeaMaker

Hello Folks,

I'm looking for a way to update the part(s) that are already imported and positioned in IdeaMaker, with the new stl file but without deleting it and re-importing it.

Is there a way to tell to IdeaMaker that the source file for that part changed?
by danielq
Mon Jun 11, 2018 1:46 pm
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

Re: deactivate unused extruder

You want to stop heating of the unused nozzle after some height or stop heating every layer when nozzle switching? If only stop heating after some height, you can try pre-layer settings. What I need was saving a bit of time avoiding heat the not used extruder ( now I'm printing alternating the extr...
by danielq
Thu Jun 07, 2018 6:47 am
Forum: Printing Settings
Topic: Reduce Raft where not needed
Replies: 5
Views: 912

Reduce Raft where not needed

Hello Folks! I'm looking for a way to reduce printing time and notice that ideamaker create the raft under all the occupied area of the part, even where the part do not touch the bed. As an example, when I print a ring 5mm thickness, lets say about 100mm wide, the slicer create the raft also in the ...
by danielq
Thu Jun 07, 2018 6:39 am
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

Re: deactivate unused extruder

You want to stop heating of the unused nozzle after some height or stop heating every layer when nozzle switching? If only stop heating after some height, you can try pre-layer settings. What I need was saving a bit of time avoiding heat the not used extruder ( now I'm printing alternating the extr...
by danielq
Thu Jun 07, 2018 6:34 am
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

Re: deactivate unused extruder

Under the cooling tab, you can set the unused extruder temp to 0. It seems to work for me on software version 3.1.0 (local IT prevents me from upgrading often) I took it a step further and physically remove the 2nd extruder feed stepper motor when I'm not using the 2nd material. You'll be able to p...
by danielq
Mon May 28, 2018 6:18 am
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

Re: deactivate unused extruder

In a "mono extruder" print, I wish I could stop the heating from the beginning or from the preheating of the of the extruder that is not used in all the print. This is caused because I usually preheat both, the extruder that will be used and the bed, mannualy, before I start the printer, s...
by danielq
Thu May 24, 2018 6:40 am
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 10
Views: 1217

deactivate unused extruder

Hello Folks,

I was wondering if there is any possibility to exclude the heating up of the unused extruder?

I know I can do it manually by editing the gcode, but I hope there is a setting on ideamaker.




Thanks to everyone who can help me!
by danielq
Wed May 23, 2018 1:00 pm
Forum: Printing Settings
Topic: deactivate unused extruder
Replies: 1
Views: 294

deactivate unused extruder

Hello folks! first post here, so if there is something wrong, tell me! Before I start a print I usually start heating up the bed and the extruder that will be used during printing, but when I start the print, the printer wait till the second extruder reach a predefined temp. I was wondering if there...

Go to advanced search