Search found 26 matches

by Ressegger
Wed Dec 09, 2020 5:21 pm
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

Does any one have a better understanding of where the signal comes frome and its path to that mosfet.?
by Ressegger
Wed Dec 09, 2020 6:20 am
Forum: Pro2 Series
Topic: 'Special' filament problem/questions (wood, metal, carbon, etc.)
Replies: 7
Views: 2833

Re: 'Special' filament problem/questions (wood, metal, carbon, etc.)

I've used them successfully wood multiple brands regular and red wood, also bronze ans well as aluminum., all came out quite well but I have also done the Blower modification by ocelot whitch likely contributed significantly to my success as I had issues before doing that. For wood redwood by prilin...
by Ressegger
Wed Dec 09, 2020 5:57 am
Forum: Pro2 Series
Topic: What is the part, and why is it smoking and loose?
Replies: 6
Views: 2131

Re: What is the part, and why is it smoking and loose?

Carful I hade the same issue but it also shorted out the bed heater frying the motion board (a 600$ part I belive) do carful I ended up cutting all that out and running my own wires with a old xt60 Connector I had laying around and really wish I would have done so before firing my motion board
by Ressegger
Wed Dec 09, 2020 3:36 am
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

Sorry I should have been more clear originally it was the exstruder whitch with your help I was able to replace the mosfet and get it working again (using the one you sugested from the n series., worked wonderfully and I even have one left so I'm hoping it might help me fix this problem whitch is th...
by Ressegger
Sun Dec 06, 2020 3:09 pm
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

OK some bad luck the heter wires to the bed shorted out and now the bed heater is not working I'm figuring it's thee same thing so whitch chip is the mosfet for the bed?
by Ressegger
Mon Nov 30, 2020 1:52 pm
Forum: Hardware
Topic: Hot Glue Dripping for Connectors (silicone)
Replies: 12
Views: 6162

Re: Hot Glue Dripping for Connectors (silicone)

Wow I know this is an old post but I gotta say I've never seen a company so absolutely deaf to input. I'll tell you a secret that I'm sure even now you still won't listen too but you will increase your sales a bit and your customer retention alot and help your customer relations exponentially if you...
by Ressegger
Mon Nov 30, 2020 8:34 am
Forum: Printing Settings
Topic: Pressure / linear advance?
Replies: 21
Views: 3750

Re: Pressure / linear advance?

Just wanted to state that I would very much like this as well and would never consider anouther.raise product otherwise.
by Ressegger
Tue Nov 24, 2020 8:31 pm
Forum: Hardware
Topic: Gantry sag as seen by a BLTouch
Replies: 6
Views: 2583

Re: Gantry sag as seen by a BLTouch

Are there any people that have done this or similar things to a pro two? I ask because the pro 2,at least as i understand it, has closed source firmware unlike the n series witch is why no one is using bl touch or anything like that on it. Blower fans and liquied cooling with or without e3d hoteds s...
by Ressegger
Tue Jun 02, 2020 11:55 pm
Forum: Hardware
Topic: Gantry sag as seen by a BLTouch
Replies: 6
Views: 2583

Re: Gantry sag as seen by a BLTouch

i there anything that you lost by going to the duest? im thinking about doing the same thing to my pro 2 plus
by Ressegger
Sat May 16, 2020 1:56 pm
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

Just wanted to thank you once again for your help I bout five of the part you posted from digi key and I fried the first but on the second try I got it. It looks like crap as far as soldering goes but it's working and saved me 375$ about.
by Ressegger
Sat May 09, 2020 8:07 pm
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

Wow. And I really mean this: thank you. You definitly didn't have to take so much time out of your day to go in to detail to help me but I really appreciate that you did.
by Ressegger
Sat May 09, 2020 12:58 pm
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

To be Clear though it seems the chip sayes 95960E PEm 1822 d2 613on. It or atleasetl that's what I think it sayes its definitly the one for the left exstruder but when I Google that I don't get much at all vrs when I Google what you posted so I'm assuming I'm reading it wrong or that the print on th...
by Ressegger
Sat May 09, 2020 11:23 am
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Re: Fried a chip on motion board I belive by accidently shorting the hot end heater wire

Wow thank you so much! You really went above and beyond and was way more help then I was expecting as I typed the question. And yes that's the chip. The middle one for extruder 0.
by Ressegger
Fri May 08, 2020 11:16 am
Forum: Pro2 Series
Topic: Fried a chip on motion board I belive by accidently shorting the hot end heater wire
Replies: 19
Views: 2840

Fried a chip on motion board I belive by accidently shorting the hot end heater wire

OK basically I was messing with my hot end and I stupidly didn't unplug the printer first. Blue the blade fuse on the motion board but after getting it up and running again it would soon as I turn it on that same heater just keeps getting hotter and hotter even if set to zero. :( now I was looking a...
by Ressegger
Mon Mar 23, 2020 10:23 am
Forum: Printing Settings
Topic: Nozzle randomly crashing into part and bed
Replies: 8
Views: 3786

Re: Nozzle randomly crashing into part and bed

just too add I had a similar problem which was fixed after trying a suggestion I found on here to check the collets tightening screws UT first make sure the smaller screw is just barely tightened to were it keeps the nozzle from dropping down as when it is set any tighter it can keep the larger scre...
by Ressegger
Tue Feb 11, 2020 8:49 am
Forum: Pro2 Series
Topic: Thinking about bailing on the Pro2Plus.... just cant keep fixing it.
Replies: 12
Views: 4892

Re: Thinking about bailing on the Pro2Plus.... just cant keep fixing it.

Build a RailCore II - that's what I did - amazing printer. You know I've been considering doing just that how is it compared to the pro 2 for you? Both Gaines and losses if there is any. There not too much out about the true results of the railcore but what I have seen is great but I just worry wha...
by Ressegger
Sun Feb 09, 2020 8:33 am
Forum: Hardware
Topic: Serial error: no such device or address
Replies: 9
Views: 5999

Re: Serial error: no such device or address

incase anyone is getting this error for me it seems it was a bad update somehow iperformed another update and it cleared it up
by Ressegger
Sat Feb 01, 2020 5:16 pm
Forum: Pro2 Series
Topic: An end to jams - blowers are better...
Replies: 25
Views: 13039

Re: An end to jams - blowers are better...

Really loving this modification, first with some 4010 blowers on the side and the duct scaled alittle to fit an a random 5150 fan and will help full it wasn't nearly as good as it is now using the parts from digikey you suggested I'm using this with abs as it's all I had on hand and it actually hold...

Go to advanced search