Search found 16 matches

by Francisco munoz
Thu Sep 27, 2018 3:48 am
Forum: General
Topic: needing help
Replies: 1
Views: 1008

needing help

I have had nothing but problems I paid $4200 for an expensive show piece nothing more and have been waiting for over a month for a response now I know people get busy but a month guys really flsun in CHINA gets back to me in 12 hrs I feel as if I was sold a lemon company got paid but I the customer ...
by Francisco munoz
Fri May 04, 2018 12:48 pm
Forum: Hardware
Topic: Help on assembly
Replies: 1
Views: 821

Help on assembly

So I got a printer with a bad rod I finally recieved it but no response in 3 days how to install yes I made a ticket about 8 days ago and still no working printer anyone know what to take off exactly and how to place a new rod
by Francisco munoz
Sun Apr 22, 2018 6:26 pm
Forum: Printing Settings
Topic: only raise filament curls on nozzle
Replies: 1
Views: 1116

only raise filament curls on nozzle

so ive tried about 8 brands of filament all work great except the 2 that came with the printer I'm thinking its too moist or too dry anyone know what would cause that every where ive read its the extruder being dirty but if other material works fine that's not my case
by Francisco munoz
Sun Apr 22, 2018 11:12 am
Forum: Hardware
Topic: metal rod I dont see in parts list
Replies: 1
Views: 886

metal rod I dont see in parts list

so ive been working on the printer going threw just about everything wondering why prints weren't perfect well I turned off the motor was moving the hotend around checking for bed leveling well the problem was found when moving the hot end left and right it bounces because the metal rod on the left ...
by Francisco munoz
Tue Apr 17, 2018 8:43 pm
Forum: Hardware
Topic: temp on hot end and bed
Replies: 1
Views: 1016

temp on hot end and bed

so printer seems to work fine is it normal for temps to go 1 or 2 degrees down then correct temp then 1 or 2 up then down again I'm thinking because of the airflow of the fan wich seems normal but asking cause I'm not sure.Any ideas or opinions out there
by Francisco munoz
Tue Apr 17, 2018 8:15 pm
Forum: General
Topic: Looking for a printer, should we buy a new Pro2, new N2 or a used N2?
Replies: 7
Views: 5502

Re: Looking for a printer, should we buy a new Pro2, new N2 or a used N2?

n2 plus dual extruder with hardened nozzles its $15 each nozzle but that's if your using nylon material other than that stock will be perfect for your needs Raise3d is in its own class compared to others no need to try any other printer and print size volume is larger so not only open material but w...
by Francisco munoz
Sun Apr 15, 2018 11:57 pm
Forum: Hardware
Topic: when I hit start print the print head doesnt move
Replies: 5
Views: 1887

Re: when I hit start print the print head doesnt move

and when I hit stop it stays loading stop I have to go in and reset machine don't know if that help you or not and this time I set for 215 it stops at 212 heat bed I set to 0
by Francisco munoz
Sun Apr 15, 2018 11:48 pm
Forum: Hardware
Topic: when I hit start print the print head doesnt move
Replies: 5
Views: 1887

Re: when I hit start print the print head doesnt move

yes it gets to that point hits and stabilizes at right temp then starts to go 1 up and 1 down then stabilize but nothing after that the gcode says exactly like you put only difference is m92 e415 I installed a bondtech extruder so that was required all the wires seem to be in tact and file I'm print...
by Francisco munoz
Sun Apr 15, 2018 2:46 pm
Forum: Hardware
Topic: when I hit start print the print head doesnt move
Replies: 5
Views: 1887

Re: when I hit start print the print head doesnt move

Jetguy you made my day vary detailed description I was about to take everything apart to rebuild wich could have created a new problem thank you a million grateful you answer this post ill let you know how it goes.
by Francisco munoz
Sun Apr 15, 2018 12:44 pm
Forum: Hardware
Topic: when I hit start print the print head doesnt move
Replies: 5
Views: 1887

when I hit start print the print head doesnt move

so ive checked all the wires they seem secure ive done the latest updates it was working fine then one day (2 days ago) it stopped I spoke with dustin from raise about a separate issue I did the trouble shooting but still printer acts normal but doesn't move it will only move if I tap the command on...
by Francisco munoz
Mon Apr 09, 2018 12:37 am
Forum: Hardware
Topic: New N2PLus.... shall I go BondTech straight away?
Replies: 15
Views: 4488

Re: New N2PLus.... shall I go BondTech straight away?

Yea that's what it was I switched the wires to reverse the motor but when i connected them back I put them in reverse bondtech actually told me the same thing but not before I wanted to pull my hair out from frustration and fixed it on my own i know some things take patients and focus i traced the l...
by Francisco munoz
Sun Apr 08, 2018 2:28 pm
Forum: Hardware
Topic: Project Bondtech Extruder
Replies: 719
Views: 216434

Re: Project Bondtech Extruder

firmware based on firmware 1.1.6 upgraded for Hybrid mode. N1 - https://www.dropbox.com/s/38qmrc582x456k7/N1-1.1.6Hdual.firm?dl=0 N2 - https://www.dropbox.com/s/c32t9epeit1yke2/N2-1.1.6Hdual.firm?dl=0 N2 PLUS - https://www.dropbox.com/s/na4b2cz1nm2xwwk/N2PLUS-1.1.6Hdual.firm?dl=0 Default extruder s...
by Francisco munoz
Sun Apr 08, 2018 2:17 pm
Forum: Hardware
Topic: New N2PLus.... shall I go BondTech straight away?
Replies: 15
Views: 4488

Re: New N2PLus.... shall I go BondTech straight away?

My N2 Plus arrives later today and I'm now spending a bit more time in the forum. It seems the BondTech extruder seems to be a 'must do' upgrade (wish I'd factored that into the cost before pulling the trigger!). Should I just go ahead and get it from the start? it sounds like the weight saving alo...
by Francisco munoz
Fri Apr 06, 2018 12:46 am
Forum: Hardware
Topic: New N2PLus.... shall I go BondTech straight away?
Replies: 15
Views: 4488

Re: New N2PLus.... shall I go BondTech straight away?

My N2 Plus arrives later today and I'm now spending a bit more time in the forum. It seems the BondTech extruder seems to be a 'must do' upgrade (wish I'd factored that into the cost before pulling the trigger!). Should I just go ahead and get it from the start? it sounds like the weight saving alo...
by Francisco munoz
Thu Apr 05, 2018 10:40 pm
Forum: Hardware
Topic: Bondtech Upgrade Typical Speed Improvement?
Replies: 7
Views: 3045

Re: Bondtech Upgrade Typical Speed Improvement?

How is the black stepper motor removed there is nothing to show the videos on YouTube are in Swedish or German i just need to remove the clips do you push sides top pull or what cause it looks like its welded by plastic not my doing so im stuck its not something I wanna just guess about
by Francisco munoz
Thu Apr 05, 2018 10:26 pm
Forum: Software
Topic: ideaMaker 3.1.0 Release Note
Replies: 61
Views: 18880

Re: ideaMaker 3.1.0 Release Note

lorenolepi wrote:I'm a fan of the new infill and solid fill patterns. Thanks!

My download only came with 2 untill patterns is that all there is.

Go to advanced search