Search found 7 matches

by Yichen
Wed Apr 28, 2021 12:25 am
Forum: Software
Topic: Raise3d E2 pause slightly during print
Replies: 14
Views: 1597

Re: Raise3d E2 pause slightly during print

The resolution is maybe to high. Look at "Minimal Segment Length" in the template under the tab Layer- other. You can change this to a higher value and you will see the difference in preview after slicing. I get trubles with gyroid infill an gyroid supports if the "Minimal Segment Le...
by Yichen
Mon Apr 26, 2021 3:02 am
Forum: E2
Topic: Printing head pauses from time to time?
Replies: 23
Views: 3674

Re: Printing head pauses from time to time?

Just posted in another topic. Let me post here again. I am experiencing the same thing. And I believe this happens when printing curves where there are many lines of Gcode sent to the controller board from the UI computer. And the computer does not send codes as fast as needed in real time, so the X...
by Yichen
Mon Apr 26, 2021 2:59 am
Forum: Software
Topic: Raise3d E2 pause slightly during print
Replies: 14
Views: 1597

Re: Raise3d E2 pause slightly during print

Does anyone has a solution to this issue? I am experiencing the same thing. And I believe this happens when printing curves where there are many lines of Gcode sent to the controller board from the UI computer. And the computer does not send codes as fast as needed in real time, so the XY movement p...
by Yichen
Mon Nov 16, 2020 9:20 pm
Forum: Software
Topic: Bug of ironing, flowrate out of control
Replies: 1
Views: 227

Bug of ironing, flowrate out of control

Hi everyone, I need to use the ironing function to print a part. However, the ironing flowrate does never apply. No matter I set it to 1% or 3% or 5%, it just extrudes 100% materials directly on the ironing layer, and messes up everything. I checked the generated gcode, and the extrusion values are ...
by Yichen
Sat Jun 29, 2019 1:45 am
Forum: Software
Topic: Two serious problems in the lasest RaiseTouch 1.2.1 with RaiseCloud
Replies: 0
Views: 1308

Two serious problems in the lasest RaiseTouch 1.2.1 with RaiseCloud

Previously my N2 printer can connect to the wifi router automatically. Recently after updating the RaiseTouch 1.2.1 with RaiseCloud, it always fail to join the wifi. Each time after turn on the printer, I much reboot the router then the printer can get access. My computer and other devices are still...
by Yichen
Wed Jun 19, 2019 8:09 pm
Forum: Software
Topic: Disable the "Task finished" menu after printing in the latest RaiseTouch
Replies: 13
Views: 5883

Disable the "Task finished" menu after printing in the latest RaiseTouch

It seems I didn't get reply from the ticket. Let me post the question here. I have installed the latest RaiseTouch with RaiseCloud in our N2 printer. The cloud management feature is really fine. However, with this OS, after each normal printing procedure, the display always shows a menu of "Tas...
by Yichen
Thu Apr 05, 2018 7:16 pm
Forum: Hardware
Topic: Nobody replies my ticket, the printer cannot boot
Replies: 3
Views: 2153

Nobody replies my ticket, the printer cannot boot

I haven't used my N1 printer for one month. Now I am not able to boot it. After turn on the power, there is back light in the screen, but it displays black. Also the fans are working and the LEDs on the main board and power board are working, as shown in the attached photo. I have tried all the solu...

Go to advanced search