Idea Maker Infill ever 2. Layer

Please post your suggestions for software changes here
User avatar
Stefan J. Trucker
Posts: 14
Joined: Sat May 26, 2018 7:28 am
Location: Vienna
Contact:

Idea Maker Infill ever 2. Layer

Postby Stefan J. Trucker » Mon May 28, 2018 9:02 am

The only Feature I am missing in Idea Maker is the possibility to have infill only eveyr second or third layer, which makes high detailed prints, print a lot faster.

So an independent Layer high for Infill would be great.

Thank you very much, best regards
Be creative, be independent, be you!

User avatar
Vicky@Raise3D
Posts: 4138
Joined: Fri Mar 25, 2016 3:54 am

Re: Idea Maker Infill ever 2. Layer

Postby Vicky@Raise3D » Tue May 29, 2018 9:03 am

Infill every 2 layer means you want to print the infill with double layer height of the shells one time while two layers of shell printed out?

User avatar
Stefan J. Trucker
Posts: 14
Joined: Sat May 26, 2018 7:28 am
Location: Vienna
Contact:

Re: Idea Maker Infill ever 2. Layer

Postby Stefan J. Trucker » Tue May 29, 2018 10:46 am

yes, that is exactly what I mean

I know the software needs to check that nozzle diameter is not smaller than layerhight, but if you print very small layers

So with varialble layerhigh I think it will be best to have layer high for infill which is independend
that means you can have smaller layers outershells when having high details and you won't waste to much time on infill

thank you very much
Be creative, be independent, be you!

EldRick
Posts: 319
Joined: Thu Jun 22, 2017 5:55 am

Re: Idea Maker Infill ever 2. Layer

Postby EldRick » Tue May 29, 2018 4:10 pm

You can do this using Slic3r or Cura.

User avatar
Stefan J. Trucker
Posts: 14
Joined: Sat May 26, 2018 7:28 am
Location: Vienna
Contact:

Re: Idea Maker Infill ever 2. Layer

Postby Stefan J. Trucker » Wed May 30, 2018 9:32 am

yes I know, but it would be awesome that Idea Maker would have that option too
Be creative, be independent, be you!

User avatar
Vicky@Raise3D
Posts: 4138
Joined: Fri Mar 25, 2016 3:54 am

Re: Idea Maker Infill ever 2. Layer

Postby Vicky@Raise3D » Wed May 30, 2018 10:34 pm

Notes taken.

User avatar
Stefan J. Trucker
Posts: 14
Joined: Sat May 26, 2018 7:28 am
Location: Vienna
Contact:

Re: Idea Maker Infill ever 2. Layer

Postby Stefan J. Trucker » Sat Jun 02, 2018 4:35 pm

thank you very much :)
Be creative, be independent, be you!


Return to “Software”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests