filament setting for 3dkTOP

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
User avatar
Allan Sche Sar
Posts: 33
Joined: Fri Aug 11, 2017 10:56 am
Location: Germany

filament setting for 3dkTOP

Postby Allan Sche Sar » Sat Aug 11, 2018 8:52 am

He there,

was anyone a filament setting for the 3dkTOP material?
This filament is it: https://3dk.berlin/en/3dktop-heat-resis ... black.html

My problem is, that I have clogging problems. The problems are not linked to retraction.

User avatar
Allan Sche Sar
Posts: 33
Joined: Fri Aug 11, 2017 10:56 am
Location: Germany

Re: filament setting for 3dkTOP

Postby Allan Sche Sar » Sun Aug 12, 2018 10:49 am

Hello there,

these are a test part printed with 3dkTOP at 260 °C nozzle temperature and 100 °C build plate.
The outside is perfect, but the inside has a lot of these little pearls.

How can I reduce this? More retraction mm makes a poor result.

PS the print settings available under:
https://www.dropbox.com/s/3wnk9e2a76b1y ... t.bin?dl=0
Attachments
3dkTOP Testpart1.jpg


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 4 guests