Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Discussions about ideaMaker and other printing software.
User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Fri Aug 31, 2018 4:44 pm

Hi All,

We have released the new version of RaiseTouch 1.0.0 today.

Release Notes:
Added new features and options
Fixed bugs based on users' feedback

Read More
https://www.raise3d.com/blogs/news/raisetouch_1-0-0-831-release-notes
Download RaiseTouch 1.0.0: https://www.raise3d.com/pages/download#down-touch

Alex M.
Posts: 175
Joined: Tue Apr 10, 2018 4:59 pm

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Alex M. » Fri Aug 31, 2018 9:24 pm

Is it just me or does this EULA contradict the open-source designation of the firmware on the N series machines?

Specifically where it states "your use of any software and firmware (including all related documentation, the "Software") utilized in the operation of any printer manufactured by the Licensor...."

Image

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Fri Aug 31, 2018 10:09 pm

Alex M. wrote:Is it just me or does this EULA contradict the open-source designation of the firmware on the N series machines?

Specifically where it states "your use of any software and firmware (including all related documentation, the "Software") utilized in the operation of any printer manufactured by the Licensor...."



It is just a standard EULA specifically for RaiseTouch but not for firmware for motion controller board.

Alex M.
Posts: 175
Joined: Tue Apr 10, 2018 4:59 pm

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Alex M. » Fri Aug 31, 2018 11:48 pm

I guess I'll learn more next week after the holiday but the person I spoke with in our legal department felt otherwise and suggested that I do not upgrade. He said it specifically states "any software or firmware utilized in the operation" of any printer manufactured by Raise3D.
Kind of hard to utilize the operation of the printer without the motion controller firmware.

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Wed Sep 12, 2018 11:06 pm

The terms related to Open Source firmware are in Section 2.
Your use of the Open-Source Components is governed by, and subject to, the terms and conditions of the applicable open-source and public licenses.

User avatar
Noren
Posts: 392
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Noren » Fri Sep 14, 2018 3:48 pm

Can one update to 1.0.0 directly from 0.9.7 without first installing 0.9.11?

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Mon Sep 17, 2018 5:29 pm

Yes, it can directly be updated from 0.9.7 to 1.0.0.

DeX
Posts: 97
Joined: Fri Apr 21, 2017 6:56 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby DeX » Thu Sep 20, 2018 7:38 pm

N2 will download this update by itself, right !?

Evan
Posts: 119
Joined: Mon Mar 21, 2016 3:07 pm

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Evan » Fri Sep 21, 2018 2:56 pm

No, you'll have to update it manually

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Tue Oct 09, 2018 12:20 pm

Can't upgrade past 0.9.2. Tried on a fresh formatted SD card, first to the last release (1_0_0_831), then incremental from 0.9.7. No dice...

Jetguy
Posts: 2700
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Jetguy » Tue Oct 09, 2018 1:09 pm

venosa wrote:Can't upgrade past 0.9.2. Tried on a fresh formatted SD card, first to the last release (1_0_0_831), then incremental from 0.9.7. No dice...

I think you must use USB not an SD card. The reason is, different storage devices are seen differently and so USB is the device it looks for to update.

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Wed Oct 10, 2018 3:40 pm

Jetguy wrote:I think you must use USB not an SD card. The reason is, different storage devices are seen differently and so USB is the device it looks for to update.


Tried twice, with two different USB sticks. Same behavior.

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Wed Oct 10, 2018 6:10 pm

Can the touchscreen recognize the other files in the USB drive?

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Thu Oct 11, 2018 1:31 pm

Vicky@Raise3D wrote:Can the touchscreen recognize the other files in the USB drive?

Yes, it can see Gcode files inside.
Tried again, reformatted the drive many times, FAT32, copied only the updater file, but after a long wait with a black screen all I have is version 0.9.2.1026...
I tried also rollback to 0.9.0, unsuccessfully.

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Sat Oct 13, 2018 12:30 am

Would you mind open a support ticket to contact our technician? I remember there has a way to update firmware via SSH login remotely from laptop.

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Sat Oct 13, 2018 12:42 pm

Vicky@Raise3D wrote:Would you mind open a support ticket to contact our technician? I remember there has a way to update firmware via SSH login remotely from laptop.

Created!

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Mon Oct 15, 2018 5:40 pm

venosa wrote:
Vicky@Raise3D wrote:Would you mind open a support ticket to contact our technician? I remember there has a way to update firmware via SSH login remotely from laptop.

Created!


Would you like you advise the ticket number, I can ask technicians pay special attention to if needed.

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Tue Oct 16, 2018 12:38 pm

Vicky@Raise3D wrote:Would you like you advise the ticket number, I can ask technicians pay special attention to if needed.


Yes! I was about to ask you about, the ticket seems stalled...
It's #4942

Thank you.

User avatar
Vicky@Raise3D
Posts: 4297
Joined: Fri Mar 25, 2016 3:54 am

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby Vicky@Raise3D » Tue Oct 16, 2018 6:26 pm

Will inform the technicians to follow up.

User avatar
venosa
Posts: 45
Joined: Fri May 27, 2016 7:35 pm
Location: Rio de Janeiro
Contact:

Re: Touchscreen Firmware 1.0.0 Release Note 2018.8.31

Postby venosa » Wed Oct 17, 2018 2:40 pm

Vicky@Raise3D wrote:Will inform the technicians to follow up.

All done.
Thank you!

A transcript of the email I sent to the technician:

"All went well.
At first I had an error transferring the file. I was in a Mac using Interarchy to do SCP. The log pointed to a no space error. I tried to batch delete but Interarchy crashed, then I tried WinSCP on Parallels, trashed the full root directory, transferred the file... and voilá!
Te curious thing is how all this started, I was unable to upload files from Ideamaker, allways having errors. Than I heard about rsync, now on the new Raisetouch release. And all of this was caused by a full storage space on the machine.
If I may I would suggest two things on future updates:
A notification alarm when the storage is about to be full
A batch delation of these files, now you have to delete one by one..."
Last edited by venosa on Thu Oct 18, 2018 1:45 am, edited 1 time in total.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 5 guests