Human Hearth in a Crystal Dome

Show off your prints, mods, etc.
User avatar
Mecha_Monster
Posts: 172
Joined: Wed May 11, 2016 2:07 am
Location: Mexico
Contact:

Human Hearth in a Crystal Dome

Postby Mecha_Monster » Fri Nov 24, 2017 4:31 pm

Following the idea of the pelvis; I move to print an anatomically correct model of the human hearth and its vessels.

Printed with Polymaker's PC-Max and painted with oil paints; I am veeeeery pleased with the results.

I use only 1 nozzle, the supports where also made with PC, which come off easily

I <3 Raise3D

IMG_0464.jpg

Vice Chief
Posts: 75
Joined: Wed Aug 23, 2017 5:04 am
Contact:

Re: Human Hearth in a Crystal Dome

Postby Vice Chief » Fri Nov 24, 2017 5:04 pm

Such a nice print. How much surface prep do you do before painting something like this? Do you prime, fill, sand?

User avatar
Mecha_Monster
Posts: 172
Joined: Wed May 11, 2016 2:07 am
Location: Mexico
Contact:

Re: Human Hearth in a Crystal Dome

Postby Mecha_Monster » Fri Nov 24, 2017 9:02 pm

Thanks!,

No prep for this print, I painted right away on the print.
Anyhow, for other prints I use sand paper; Polycarbonate is very easy to sand and the results are amazing. When I am going to sand the print, I use >3 perimeters and >5 top/bottom layers

Bellow is a picture before painting


23621200_356449924780213_2685670982190849670_n.jpg


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest