Two different sized nozzles: Feature request

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
DesignTheEverything
Posts: 1
Joined: Mon Mar 06, 2017 3:03 pm

Two different sized nozzles: Feature request

Postby DesignTheEverything » Mon Mar 06, 2017 3:16 pm

I recently bought two different sized nozzles for my dual extrusion N2. I would like to be able to use both nozzle sizes in the same print. For example, I could use my .4mm nozzle for easy to remove supports and build the model very quickly with a .8mm nozzle. Or print the external shells with a .2mm nozzle for fine details, and print the internal structures with a .4mm for speed.

I would also like to be able to set separate settings for each extruder so that I can print two materials at the same time. For example, I would like to print a design that has pieces that are TPU, and pieces that are PLA. This would be very difficult since the retraction and speed setting would need to be very different for each plastic.

User avatar
Vicky@Raise3D
Posts: 2439
Joined: Fri Mar 25, 2016 3:54 am

Re: Two different sized nozzles: Feature request

Postby Vicky@Raise3D » Thu Mar 09, 2017 9:54 am

Well noted. Should already been on our list.

User avatar
Noren
Posts: 123
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Re: Two different sized nozzles: Feature request

Postby Noren » Wed Mar 15, 2017 9:49 am

+1 for this.

frjez
Posts: 40
Joined: Tue Jan 24, 2017 2:55 am

Re: Two different sized nozzles: Feature request

Postby frjez » Wed Mar 22, 2017 6:36 pm

ARGHRGRGRG! I just posted a similar "question" in the Software forum.
This my Raise3D friends IS A MUST! Please do that ASAP.

F.

User avatar
Vicky@Raise3D
Posts: 2439
Joined: Fri Mar 25, 2016 3:54 am

Re: Two different sized nozzles: Feature request

Postby Vicky@Raise3D » Fri Mar 24, 2017 7:56 am

Thanks for your suggestion. We have already added it into wish list.

colbylippincott
Posts: 19
Joined: Mon Aug 29, 2016 5:21 pm

Re: Two different sized nozzles: Feature request

Postby colbylippincott » Wed May 31, 2017 11:26 pm

+1

User avatar
Michael.P@Raise3D
Posts: 106
Joined: Wed Jul 20, 2016 4:51 pm
Location: Costa Mesa
Contact:

Re: Two different sized nozzles: Feature request

Postby Michael.P@Raise3D » Thu Jun 01, 2017 3:36 am

This one is still high on the list, I have a few users calling in asking for it as well. It is not a simple thing to just add in and it will take us time to do so.
Michael Petitclerc, Technician
Tel: +888 963 9028
Web: http://www.raise3d.com

lrosasco
Posts: 7
Joined: Tue May 16, 2017 1:31 pm

Re: Two different sized nozzles: Feature request

Postby lrosasco » Fri Sep 01, 2017 12:12 am

Any update on this feature?

User avatar
Vicky@Raise3D
Posts: 2439
Joined: Fri Mar 25, 2016 3:54 am

Re: Two different sized nozzles: Feature request

Postby Vicky@Raise3D » Fri Sep 01, 2017 6:49 am

Almost done already. Will be added into next version of ideaMaker.
We may consider release beta version on forum first for test, then post onto our website.


Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 2 guests