STL Design Shared

Thoughts about Raise3D, 3D printing and making in general.
firesped
Posts: 849
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Mon Jul 17, 2017 8:33 am

I'll have to take it apart again. I modified the part by putting some thread inserts into it so the screws have something to hold onto.

the part is a square box with some holes to screw the endstop board into the shim. It has offset holes to screw the endstop board onto the back.

now that I am thinking about it. my issue is the endstop is not getting hit. I have been trying to figure out how this was corrected. the shim you posted may fix that issue but I still need the new endstops I already ordered. I'll need to get longer screws as well.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 3943
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Mon Jul 17, 2017 10:32 am

Sounds like very similar to the one I shared. The one I shared may be a little thicker than the one on yours. May help you problem.

firesped
Posts: 849
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Tue Jul 18, 2017 12:31 am

got my bed level and got this printed. bought some M3 x 16 screws and got it installed. it is now homing correctly.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 3943
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Tue Jul 18, 2017 2:34 am

Good to hear your feedback!

firesped
Posts: 849
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Fri Jul 28, 2017 9:47 pm

here is my filament runout sensor that uses the raise3d endstop.

https://www.thingiverse.com/thing:2457483
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

EldRick
Posts: 307
Joined: Thu Jun 22, 2017 5:55 am

Re: STL Design Shared

Postby EldRick » Sun Aug 27, 2017 5:24 pm

Please add to the list. I've scaled the Raise3D-provided fan duct .stl to the same height as the post-kickstarter injection molded piece, as part of this: http://www.thingiverse.com/thing:2502206

User avatar
3DWP
Posts: 61
Joined: Fri Dec 15, 2017 5:48 pm

Re: STL Design Shared

Postby 3DWP » Sat Dec 23, 2017 1:18 pm

I posted a dual color extruder board cover on Thingiverse so you see the Raise3d logo better: https://www.thingiverse.com/thing:2727001

Raise3DExtruderBoardCover.JPG

User avatar
Noren
Posts: 380
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Re: STL Design Shared

Postby Noren » Sat Feb 03, 2018 8:27 pm

Edit:

I noticed that the files for the V2 fancover was shared in a previous post in this thread.

Please add them to the first post.
(Also add them to the meny with example models in IdeaMaker).

Just like we get software updates. It would be nice if Raise3D could send out “parts updates” as well. Look at how Prusa does. They are great about fixing faults or problems and communicating this to the community and make files available.

I also have a question about this "edge" on the bottom of the V2 fanduct. (see image).
I's the edge "by design"? Is it there to deflect the airflow downwards?

I haven't done any simulations on the airflow since I don't have that knowledge.
Do you have any pictures on the simulated airflow that you can share?
Just curious.

fan.jpg

User avatar
Vicky@Raise3D
Posts: 3943
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Mon Feb 05, 2018 3:05 am

Noren wrote:Edit:

I noticed that the files for the V2 fancover was shared in a previous post in this thread.

Please add them to the first post.
(Also add them to the meny with example models in IdeaMaker).

Just like we get software updates. It would be nice if Raise3D could send out “parts updates” as well. Look at how Prusa does. They are great about fixing faults or problems and communicating this to the community and make files available.

I also have a question about this "edge" on the bottom of the V2 fanduct. (see image).
I's the edge "by design"? Is it there to deflect the airflow downwards?

I haven't done any simulations on the airflow since I don't have that knowledge.
Do you have any pictures on the simulated airflow that you can share?
Just curious.

fan.jpg


Update done.
The "edge" is designed to be there.
One purpose is for controlling the airflow direction as you said. The other purpose is due to that it is a molding part, leaving an edge there is for keeping the wall thickness of the whole structure to be uniform.

User avatar
3DWP
Posts: 61
Joined: Fri Dec 15, 2017 5:48 pm

Re: STL Design Shared

Postby 3DWP » Tue Feb 13, 2018 3:23 pm

I uploaded a fan mod on Thingiverse. In this setup the 35 mm fans only cool the cold end and an extra 40 mm fan on the front can cool the prints of both nozzles using gcode. Link: https://www.thingiverse.com/thing:2792586

Raise3DFanMod.jpg


This was made on my N2 Plus Dual, can somebody confirm this would fit on all N series?

detroitus
Posts: 70
Joined: Fri Mar 02, 2018 5:40 pm

Re: STL Design Shared

Postby detroitus » Tue May 08, 2018 8:57 pm

Hello all.
I designed a new bracket for a dial indicator for bed leveling with my N2 Dual that allows the plunger for the indicator to line up directly with the nozzles (at least along the y-axis). I thought I'd share it here if anyone else might find it useful.

It attaches where the stock cold-end fans attach, using the existing fan screws (I don't usually need cooling while bed-leveling).

https://www.thingiverse.com/thing:2900662

INDICATOR BRACKET.STL
(118.64 KiB) Downloaded 12 times
Attachments
INDICATOR BRACKET.JPG
20180508_163425_resized.jpg

User avatar
DrewPetitclerc
Posts: 30
Joined: Fri Mar 17, 2017 11:05 pm
Location: Morgan Hill, Ca

Re: STL Design Shared

Postby DrewPetitclerc » Thu May 10, 2018 5:02 pm

Senior Principal Designer
CAD expert user
3D Printing Teacher
Designer
Student
Artist
Comic Book collector
All around nice guy!
http://flash-graphics.deviantart.com/
http://www.thingiver...etitclerc/about
https://www.tiertime.com/community/

detroitus
Posts: 70
Joined: Fri Mar 02, 2018 5:40 pm

Re: STL Design Shared

Postby detroitus » Thu May 10, 2018 5:42 pm

DrewPetitclerc wrote:http://forum.raise3d.com/viewtopic.php?f=2&t=6460#p27120


Nice. Looks like I was thinking along the same neighborhood with my previous post.

detroitus
Posts: 70
Joined: Fri Mar 02, 2018 5:40 pm

Re: STL Design Shared

Postby detroitus » Thu May 10, 2018 5:50 pm

I also made an adjustable and mountable filament spool holder for the N2/N2+. It reduces unwinding friction without reducing it so much that the spool just unravels every time the extruder tugs on the filament, and it fits inside the compartment such that the door will still fully close (at least it does on my machine). Downside is you can't really mount two of these at a time, but I don't do much dual extrusion, so that didn't matter so much to me.

https://www.thingiverse.com/thing:2904055
Attachments
20180510_125415_resized_1.jpg
20180510_125343_resized_1.jpg
20180510_125334_resized_1.jpg

Iamkar33m
Posts: 81
Joined: Fri Dec 01, 2017 2:53 pm

Re: STL Design Shared

Postby Iamkar33m » Fri Jun 15, 2018 7:39 pm

Raise3D, can we get the STL file you use at the factory for bed level testing? Thanks!

- Kareem

EldRick
Posts: 307
Joined: Thu Jun 22, 2017 5:55 am

Re: STL Design Shared

Postby EldRick » Fri Jun 15, 2018 7:49 pm

detroitus' spool holder is the only one I've found that allows you to use the common black plastic 1kg spools with the N2 door closed, without any rubbing. An excellent design.

Jetguy
Posts: 2643
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: STL Design Shared

Postby Jetguy » Fri Jun 15, 2018 7:56 pm

Vicky@Raise3D wrote:
Jetguy wrote:Vicky, could you find the power socket cover I just posted the picture of?? I know it's 3D printed so that means somebody has the STL at the factory. Just trying to add safety for those of us with early N2 and N2Plus from the kickstarter. I had used a big piece of heatshrink to make mine safer but there is exposed mains 110 on the backside of the IEC power entry panel between the input and the fuse (the metal bus bar).
Again, earlybird N2 picture under the printer
IMG_0464[1].JPG


Here is the 3D printed version as seen on my new N2Plus
IMG_0463[1].JPG


Here it is. To install it, you need to replace the current two screws to be about M4*16, a little longer than current two.
Power Socket Cover.STL


It could be I overlooked this when searching the master list on the first post here, but could you please edit the page and ensure it's on the front master list of "official" STLs for the printer?

detroitus
Posts: 70
Joined: Fri Mar 02, 2018 5:40 pm

Re: STL Design Shared

Postby detroitus » Fri Jun 15, 2018 8:56 pm

EldRick wrote:detroitus' spool holder is the only one I've found that allows you to use the common black plastic 1kg spools with the N2 door closed, without any rubbing. An excellent design.


Thanks. I designed it specifically because that was driving me crazy. I had found a design for a "low friction" mount that cleared the door, but it turned out to be TOO low friction and would start spinning freely every time the filament would tug at the spool. I figured this would be a good compromise. And it SHOULD be adjustable to any spool size up to 1kg.

User avatar
Casale8
Posts: 222
Joined: Fri Oct 20, 2017 5:17 pm
Location: The Real Upstate New York

Re: STL Design Shared

Postby Casale8 » Fri Jun 15, 2018 9:00 pm

I added my cover extension to thingiverse:
https://www.thingiverse.com/thing:2963119
-SCC
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein

User avatar
Casale8
Posts: 222
Joined: Fri Oct 20, 2017 5:17 pm
Location: The Real Upstate New York

Re: STL Design Shared

Postby Casale8 » Fri Jun 15, 2018 9:00 pm

Casale8 wrote:I added my cover extension to thingiverse:
https://www.thingiverse.com/thing:2963119

coverextension image.JPG
-SCC
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein


Return to “General”

Who is online

Users browsing this forum: No registered users and 5 guests