Raise3D did it!

Show off your prints, mods, etc.
ABH
Posts: 75
Joined: Sun Aug 14, 2016 7:31 pm

Raise3D did it!

Postby ABH » Wed May 17, 2017 4:15 pm

Don't know if this is a serious challenge or not, but I think it shows that Raise3D printers are among the best in printing precision.
No other FDM printer (besides my N1) have reported a successful print of this spinner:
https://www.youtube.com/watch?v=TYuLVN3YHw8

One guy reported success on a Stratasys Objet, but other FDM printers only managed to do the 0.20, 0.15 or 0.10 mm clearance, even Ultimakers.
My N1 printed the part perfectly in first shot. The most challenging 0.05 wheel came loose after a little wrenching and now moves freely without any noticeable play:
https://www.youtube.com/watch?v=b0eNlVuq5BM

Just for fun :-)

User avatar
Vicky@Raise3D
Posts: 1953
Joined: Fri Mar 25, 2016 3:54 am

Re: Raise3D did it!

Postby Vicky@Raise3D » Thu May 18, 2017 6:32 am

Thanks for your sharing.

User avatar
walshlg
Posts: 1160
Joined: Wed Mar 23, 2016 12:01 pm

Re: Raise3D did it!

Postby walshlg » Thu May 18, 2017 4:38 pm

cool!

User avatar
Mecha_Monster
Posts: 108
Joined: Wed May 11, 2016 2:07 am
Location: Mexico
Contact:

Re: Raise3D did it!

Postby Mecha_Monster » Mon May 29, 2017 4:17 am

ABH wrote:Don't know if this is a serious challenge or not, but I think it shows that Raise3D printers are among the best in printing precision.
No other FDM printer (besides my N1) have reported a successful print of this spinner:
https://www.youtube.com/watch?v=TYuLVN3YHw8

One guy reported success on a Stratasys Objet, but other FDM printers only managed to do the 0.20, 0.15 or 0.10 mm clearance, even Ultimakers.
My N1 printed the part perfectly in first shot. The most challenging 0.05 wheel came loose after a little wrenching and now moves freely without any noticeable play:
https://www.youtube.com/watch?v=b0eNlVuq5BM

Just for fun :-)



Amazing!

Angus just did a follow-up video and included you, very impressive. I have to say, I am also very satisfied with the accuracy of this printer

https://www.youtube.com/watch?v=kh7y_CARmmY

lami3d
Posts: 216
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: Raise3D did it!

Postby lami3d » Mon May 29, 2017 7:41 am

yeah, i've just saw it too in angu's video
congrats!


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest