Problem: Irregular side surfaces

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
BGRD
Posts: 1
Joined: Mon Oct 23, 2017 2:43 pm

Problem: Irregular side surfaces

Postby BGRD » Mon Oct 23, 2017 3:18 pm

Hello guys,

Happy this community exists, but not so glad about the quality of prints which come from our Raise N2 Plus (dual heads).
Browsed throughout forum but didn't find this kind of theme, sorry if it exists already (please share link then).

Is there anyone else who has similar problem below (high res. image attached):

1. Regular wavy pattern on the surface;
2. It is always the same, despite I'm slowing down the print even to 50%;
3. Any filament I use, problem remains;

Would you have any insights, recommendations? Would massively appreciate any helpful feedback. Thanks.

http://vizualiterapija.lt/uploads/Raise3D_issue.jpg
Image

User avatar
Vicky@Raise3D
Posts: 2587
Joined: Fri Mar 25, 2016 3:54 am

Re: Problem: Irregular side surfaces

Postby Vicky@Raise3D » Tue Oct 24, 2017 9:04 am

Do the waves only happen at the same direction, such as left and right (X) or forward and backward(Y)?
If so, it sounds that the same problem in this post: viewtopic.php?f=7&t=1222&p=11114#p11114

That should be something wrong with your hardware. Please shoot us a support ticket, so that we can help check out the problem step by step.
help.raise3d.com/support/home


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 1 guest