Test-Onject printed - surprised

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Tinkerer
Posts: 68
Joined: Mon Oct 09, 2017 8:30 pm

Test-Onject printed - surprised

Postby Tinkerer » Thu Oct 19, 2017 9:21 pm

Just for curiosity I did print the "ctrlV"-printer test version 3 this evening.
I am happy to say I am positively surprised!
Have a look yourself - this was printed without any support.
I just wonder why I have this pitting-issues...

DSC_3990.JPG


DSC_3991.JPG


DSC_3992.JPG
Attachments
DSC_3993.JPG
DSC_3989.JPG

Rogman
Posts: 68
Joined: Mon Mar 21, 2016 12:37 pm

Re: Test-Onject printed - surprised

Postby Rogman » Thu Oct 19, 2017 10:56 pm

to me, it looks like you are real close on your settings. this looks like a slight over extrusion. try dropping the flowrate down by couple. so if your extrusion rate is 1 drop it to .98, if its 100% drop it to 98% and give it another run. :)

User avatar
Vicky@Raise3D
Posts: 2438
Joined: Fri Mar 25, 2016 3:54 am

Re: Test-Onject printed - surprised

Postby Vicky@Raise3D » Fri Oct 20, 2017 4:39 am

Try disable Check Think Wall under Other tab.
1.png
1.png (1.63 KiB) Viewed 112 times


Checked:
3.png


Unchecked:
2.png

Tinkerer
Posts: 68
Joined: Mon Oct 09, 2017 8:30 pm

Re: Test-Onject printed - surprised

Postby Tinkerer » Sun Oct 29, 2017 10:32 pm

Vicky,
I tried that.
With this option unchecked, the very small verticals are missing.

But the overhang looks better, yes.

So I sacrifice details on one end for nicer details on the other.

Hmmmm...


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests