N2 slices are using both filaments when my settings say one

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
bfwalach
Posts: 1
Joined: Thu Aug 31, 2017 6:49 pm

N2 slices are using both filaments when my settings say one

Postby bfwalach » Thu Aug 31, 2017 6:59 pm

Hi all,

We have an N2 and N2+ here at my school and I haven't had issues with this problem until recently. In some prints, I am trying to use the left or right extruder exclusively, but it seems that the printer is slicing it to use both. I have double checked that all settings only are set to the right extruder, but it's still printing the main model from both. I did a print preview from the slice files and it's showing it double-layered there, too.

Has anyone has similar issues?

User avatar
Vicky@Raise3D
Posts: 2248
Joined: Fri Mar 25, 2016 3:54 am

Re: N2 slices are using both filaments when my settings say one

Postby Vicky@Raise3D » Fri Sep 01, 2017 6:30 am

First please make sure that you have set all the parts of your model to be printed with right nozzle before slicing.
Then go to Advanced settings, and check whether the Raft and Support are all being chosen by right nozzle.
If it still show left nozzle in your preview, please share a screenshot of your preview so that we can see which part is set to be printed by left nozzle.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests