what setting for 3d850

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
vortex3d
Posts: 5
Joined: Fri Mar 24, 2017 7:12 pm

what setting for 3d850

Postby vortex3d » Wed Mar 29, 2017 10:42 am

I try to print with my raise n2plus v2, and the 3d850, but it is impossible to me to print something correct.

If anyone can tell me the best way to do. i know the bed temperature in 70°c and head at 210°c, but did you change other setting?

thanks

socke
Posts: 221
Joined: Mon Mar 21, 2016 2:55 pm

Re: what setting for 3d850

Postby socke » Wed Mar 29, 2017 4:29 pm

I have also 3D850 filament on order, hope to receive it soon.
I would start with normal PLA settings, change the temperatures as you mentioned and print a test cube. Then do changes as necessary...
Please post your findings here!

lami3d
Posts: 220
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: what setting for 3d850

Postby lami3d » Wed Mar 29, 2017 4:37 pm

I didn't know this filament but it seems it's a must :o

Image

socke
Posts: 221
Joined: Mon Mar 21, 2016 2:55 pm

Re: what setting for 3d850

Postby socke » Wed Mar 29, 2017 5:20 pm

Yes, it sounds also very promising to me.
Will get mine from this shop: http://www.hta3d.com
They have 2 brands of 3D850, one of it also on 500g and 300g spools. And the best is, it is very cheap. :)

vortex3d
Posts: 5
Joined: Fri Mar 24, 2017 7:12 pm

Re: what setting for 3d850

Postby vortex3d » Thu Mar 30, 2017 7:07 am

new test, because very difficult to print, i put head at 230°c and push ventilator rotation to 100, now the print is good but not like i want...

socke
Posts: 221
Joined: Mon Mar 21, 2016 2:55 pm

Re: what setting for 3d850

Postby socke » Thu Mar 30, 2017 7:19 am

If you would post a picture, somebody could have an idea what is going wrong...

lami3d
Posts: 220
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: what setting for 3d850

Postby lami3d » Thu Mar 30, 2017 3:06 pm

I'm going to order it (tx socke for the link)

It seems they recommand to print 50% faster

And they say it's the most accurate filament!

Is all that true ? :mrgreen:

socke
Posts: 221
Joined: Mon Mar 21, 2016 2:55 pm

Re: what setting for 3d850

Postby socke » Wed May 24, 2017 9:33 am

As nobody else gave some feedback so far, I will do it here:

This filament has become my favorite filament in the last weeks! It prints out very nicely and the parts are from excellent strength. I'm printing all types of parts from it, also mechanical parts for which other guys would usually take ABS.
Before I discovered this, I used eSun PLA+ which is similar in some terms but hard to get (at least in Europe). But 3D850 is even better than PLA+ in my opinion.
And again, this stuff is cheap and available in a lot of colors and different spool sizes! :D

I just read there is another new material from Ingeo, called 3D870. But I didn't find it as readily available filament spools. Has anybody seen this anywhere?


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests