Advice on dual extruder printing?

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Posts: 18
Joined: Wed Mar 01, 2017 12:07 am

Advice on dual extruder printing?

Postby Spikeysonic » Wed Mar 01, 2017 12:22 am

Trying to duel extrude , PLA and PVA for support at first.

is there a trick to this so they don't interfear with each other like diff height etc?

Also if it possible to mate assemblies of the different materials like in a CAD package like solidworks as opposed to best guess lining up by eye

How about PLA and ninja flex or others?

User avatar
Posts: 1621
Joined: Fri Mar 25, 2016 3:54 am

Re: Advice on dual extruder printing?

Postby Vicky@Raise3D » Wed Mar 01, 2017 8:37 am

Firstly of all, you need to make sure that the height of two nozzle tip is at the same level.

If the models are designed for dual-extruder printing by origin, you can try Align button in ideaMaker.
7.png (8.4 KiB) Viewed 128 times

Here are some tips based on our PVA and PLA test.

Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 1 guest