Makerbot ABS/PLA

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
allergictotrees
Posts: 9
Joined: Thu Jan 12, 2017 1:01 am

Makerbot ABS/PLA

Postby allergictotrees » Wed Feb 22, 2017 9:15 pm

Can someone share Extruder and Bed temp settings for Makerbot ABS and PLA? I have a dozen rolls from my previous printer (rep2x) that I would like to use on my N2+.

thanks!

Rogman
Posts: 55
Joined: Mon Mar 21, 2016 12:37 pm

Re: Makerbot ABS/PLA

Postby Rogman » Thu Feb 23, 2017 1:25 pm

for ABS I use 235 extruder temp and 110 bed temp and with PLA I go with 210 extruder temp and 60 on the bed. I have used 3 rolls of Makerbot PLA and 1 roll of ABS successfully at those settings. :)

allergictotrees
Posts: 9
Joined: Thu Jan 12, 2017 1:01 am

Re: Makerbot ABS/PLA

Postby allergictotrees » Sat Feb 25, 2017 12:41 am

thank you for the info!


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests