1.75 PETG with carbon fibre

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Andy
Posts: 10
Joined: Thu Oct 11, 2018 11:29 am

1.75 PETG with carbon fibre

Postby Andy » Wed Nov 07, 2018 1:11 pm

I'm having great success with the following settings on my Pro2.

Filamentive PETG with carbon fibre
Nozzle temp 255C
Bed 70C
Nozzle 0.6mm Olsen ruby
Infill 100%

zemlin
Posts: 372
Joined: Sat Oct 21, 2017 2:02 pm

Re: 1.75 PETG with carbon fibre

Postby zemlin » Wed Nov 07, 2018 5:54 pm

Something you might want to try - rather than 100% infill, I've had good luck with 9999 bottom layers when I want a solid part. I find the construction is more seamless.

Andy
Posts: 10
Joined: Thu Oct 11, 2018 11:29 am

Re: 1.75 PETG with carbon fibre

Postby Andy » Wed Nov 14, 2018 12:10 pm

Thanks for the hint...I'll try it.

Shelton
Posts: 275
Joined: Thu Jul 12, 2018 8:34 pm

Re: 1.75 PETG with carbon fibre

Postby Shelton » Wed Nov 14, 2018 1:14 pm

Any pictures?


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests