Printing Temperatures

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Nova
Posts: 7
Joined: Fri Oct 12, 2018 10:10 pm

Printing Temperatures

Postby Nova » Tue Nov 06, 2018 10:36 pm

Hello, we've recently been having troubles with both our Pro2 and N2 Plus printers with their printing temperatures. Whenever we set something to print on the machines, the temperatures reset. On the N2 Plus, the Heatbed resets to 40°. On the Pro2, both extruders reset to 205° and the Heatbed resets to 40°. We've never altered the temperatures in the 'Tune' section.

We've found a temporary solution in setting the temps after it's done with the temperature setting and calibration. However we're looking for a permanent fix. Any help is appreciated, thank you.

User avatar
Vicky@Raise3D
Posts: 4414
Joined: Fri Mar 25, 2016 3:54 am

Re: Printing Temperatures

Postby Vicky@Raise3D » Wed Nov 07, 2018 1:06 am

May I ask for one or two .gcode and .data files of the ones you sliced with other temperature but shown as 205 and 40 when print starts?


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 1 guest