For some parts, the major shape of the part is rectangular and doesn't need particular attention during printing so i can use 0.2mm layer height to print it
But for the top area of the part, i've got more details and complex surfaces that gives poor result while using 0.2mm
My question is: in the slicing options is it posisble to ask ideamaker to use 0.2mm height from 0 to 25mm with high speed and then use 0.1 or 0.050mm height and low speed from 25mm to the end of the print ?
Thanks in advance
Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest