20mm Calibration Box

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Deepspaceobject
Posts: 16
Joined: Wed Feb 14, 2018 8:36 pm

20mm Calibration Box

Postby Deepspaceobject » Sun Sep 30, 2018 4:20 pm

I printed the 20mm calibration box in Ideamaker.

My print is slightly oversize but I cannot find any documentation that covers how to calibrate the printer, presumably the extruders need to be tweaked.

Is there a PDF document that covers this, my printer is an N1 Dual?

Many thanks,

Brian

Shelton
Posts: 229
Joined: Thu Jul 12, 2018 8:34 pm

Re: 20mm Calibration Box

Postby Shelton » Mon Oct 01, 2018 2:25 pm

It depends what material and how you setup it. What adjustments. You have some kind of diameter compensation.

Deepspaceobject
Posts: 16
Joined: Wed Feb 14, 2018 8:36 pm

Re: 20mm Calibration Box

Postby Deepspaceobject » Mon Oct 01, 2018 3:20 pm

Hello, thank you for your reply.

I am using PLA, 1.75mm but my question was, is there a document that covers extruder calibration, presumably that would cover any material. For example there is a very good PDF on nozzle alignment, I was hoping there would be one for calibration.

Brian

Shelton
Posts: 229
Joined: Thu Jul 12, 2018 8:34 pm

Re: 20mm Calibration Box

Postby Shelton » Mon Oct 01, 2018 3:22 pm

Yes, it is. Put the ticket in the support area.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 5 guests