Printing with 0.02 Nozzles

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
TheDude
Posts: 33
Joined: Tue Jul 17, 2018 2:45 am

Printing with 0.02 Nozzles

Postby TheDude » Thu Aug 16, 2018 2:26 am

Hey Folks,

Anyone had any issues printing with new 0.02mm Nozzles? I just got mine in about a week ago. Got one print, now I cannot for the like of me get the thing to print again without immediate jams on the extruder. Loads fine. Purges fine.

Then immediately starts "skipping" and printing air.

Thoughts?

DS2017
Posts: 80
Joined: Tue Dec 05, 2017 6:00 pm
Location: San Diego

Re: Printing with 0.02 Nozzles

Postby DS2017 » Thu Aug 16, 2018 6:43 pm

do you mean 0.2mm nozzle? 0.02 is microscopic.....

anyway try to lower flowrate, print at higher layer height,

Ken85
Posts: 4
Joined: Wed Aug 22, 2018 11:23 pm

Re: Printing with 0.02 Nozzles

Postby Ken85 » Thu Aug 30, 2018 1:55 am

'TheDude' did you get this sorted?
seems to be happening to mine now and not sure how to fix it.

TheDude
Posts: 33
Joined: Tue Jul 17, 2018 2:45 am

Re: Printing with 0.02 Nozzles

Postby TheDude » Thu Aug 30, 2018 3:16 am

Well, it just started working. I completely removed the hot end, re did everything, then re-installed. Not so sure there wasn't another issue compounding what I was seeing.... perhaps related to issues with printer temp board / ribbon cable. (Search thread...)

I'll keep this thread posted of reoccurrence.

Thanks!

Meebert
Posts: 7
Joined: Tue Feb 06, 2018 2:36 pm

Re: Printing with 0.02 Nozzles

Postby Meebert » Tue Sep 18, 2018 10:57 pm

What print settings have worked best with your 0.2mm nozzle and PLA? I've only loaded up my 0.2mm nozzle once to see if it would print with default settings, I had less than perfect print quality and I haven't had time to mess with the nozzle since.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 5 guests