Just tell me what will work

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
treyco
Posts: 11
Joined: Tue Jun 26, 2018 2:53 pm

Re: Just tell me what will work

Postby treyco » Wed Sep 26, 2018 8:48 pm

akiraxx wrote:It is possible to print BVOH on an raise3d pro2 . See the photo.

PLA on 205 °C / BVOH on 200 °C, Bed on 60°C.

I have printed much more with bvoh, it just has to be very dry, the bedlevelling has to be perfect, I print without raft, only with brim, buildtak pretreated with 3d lack.


I'm not familiar with 3d lack. I keep my filament in a drybox at 10% humidity and print directly from the box. I noticed from your pic that you are using pillar supports. Do you just get better results with these or do you use them for another reason? I'm playing with a print now using the BVOH. I started it before I saw your post. I'm using slightly different temps and a raft. I'll see how it goes and try yours next if I can figure out the 3d lack.

DeftCAD
Posts: 41
Joined: Wed Dec 20, 2017 11:15 am

Re: Just tell me what will work

Postby DeftCAD » Thu Sep 27, 2018 6:15 am

Not being pedantic, but it's '3D LAC' - you'll get more hits searching that.

It's a tin of condensed magic as far as I can tell... I use it directly on glass with a heated bed and I genuinely can't remember when I last had a print that curled or didn't adhere. I use PLA and PET-G mostly: once the print has finished remove the bed, let it cool and the parts will pop off. Try doing it when it's hot and you'll need a chisel! I found it pretty useless for ABS, although I'm not a fan of that stuff so it didn't bother me.

User avatar
akiraxx
Posts: 8
Joined: Tue Jul 03, 2018 12:36 pm

Re: Just tell me what will work

Postby akiraxx » Fri Sep 28, 2018 6:29 am

In the Attachment is my profile
Attachments
pla_bvoh_0,10mm-export.zip
(9.86 KiB) Downloaded 15 times

User avatar
Korni
Posts: 259
Joined: Wed Apr 11, 2018 8:11 am

Re: Just tell me what will work

Postby Korni » Fri Sep 28, 2018 7:06 am

akiraxx wrote:In the Attachment is my profile


THX, but ideaMaker crash by import (Bug? defect *.bin?) ....
Pro2+ Image

User avatar
akiraxx
Posts: 8
Joined: Tue Jul 03, 2018 12:36 pm

Re: Just tell me what will work

Postby akiraxx » Mon Oct 01, 2018 1:48 pm

again
Attachments
PLA_BVOH_0,10mm-export.rar
(9.33 KiB) Downloaded 12 times

User avatar
Korni
Posts: 259
Joined: Wed Apr 11, 2018 8:11 am

Re: Just tell me what will work

Postby Korni » Mon Oct 01, 2018 2:18 pm

akiraxx wrote:again



No.... looks like a ideamaker import Bug?!
Pro2+ Image

User avatar
Vicky@Raise3D
Posts: 4548
Joined: Fri Mar 25, 2016 3:54 am

Re: Just tell me what will work

Postby Vicky@Raise3D » Tue Oct 02, 2018 12:57 am

Korni wrote:
No.... looks like a ideamaker import Bug?!


Are you using MAC version? We found a import bug in ideaMaker for MAC version before. If you are using MAC version and facing with importing issues, please let me know whether you'd like to help test a beta version of ideaMaker.

User avatar
Korni
Posts: 259
Joined: Wed Apr 11, 2018 8:11 am

Re: Just tell me what will work

Postby Korni » Tue Oct 02, 2018 7:10 am

Yes, MAC Version.
Pro2+ Image

User avatar
Vicky@Raise3D
Posts: 4548
Joined: Fri Mar 25, 2016 3:54 am

Re: Just tell me what will work

Postby Vicky@Raise3D » Tue Oct 02, 2018 5:39 pm

Korni wrote:Yes, MAC Version.


If you have any interest to test a beta version which may have fixed your issue, please let me know.

treyco
Posts: 11
Joined: Tue Jun 26, 2018 2:53 pm

Re: Just tell me what will work

Postby treyco » Sat Oct 06, 2018 5:15 pm

akiraxx wrote:It is possible to print BVOH on an raise3d pro2 . See the photo.

PLA on 205 °C / BVOH on 200 °C, Bed on 60°C.

I have printed much more with bvoh, it just has to be very dry, the bedlevelling has to be perfect, I print without raft, only with brim, buildtak pretreated with 3d lack.


I'm getting close to acceptable prints using the PLA and BVOH. I've attached a print of a current run. As you can see, I'm getting a lot of buildup and the ends of runs on the BVOH. I can't quite seem to find the right setting to help this. Any ideas?
BVOH.jpg

User avatar
akiraxx
Posts: 8
Joined: Tue Jul 03, 2018 12:36 pm

Re: Just tell me what will work

Postby akiraxx » Mon Oct 08, 2018 7:45 am

Please make sure that the 2 values fit, you can set the Horrizontal Offset to 1 mm.
Attachments
support.JPG

Shelton
Posts: 328
Joined: Thu Jul 12, 2018 8:34 pm

Re: Just tell me what will work

Postby Shelton » Mon Oct 08, 2018 8:16 am

Could you explain more?


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 1 guest