akiraxx wrote:It is possible to print BVOH on an raise3d pro2 . See the photo.
PLA on 205 °C / BVOH on 200 °C, Bed on 60°C.
I have printed much more with bvoh, it just has to be very dry, the bedlevelling has to be perfect, I print without raft, only with brim, buildtak pretreated with 3d lack.
I'm not familiar with 3d lack. I keep my filament in a drybox at 10% humidity and print directly from the box. I noticed from your pic that you are using pillar supports. Do you just get better results with these or do you use them for another reason? I'm playing with a print now using the BVOH. I started it before I saw your post. I'm using slightly different temps and a raft. I'll see how it goes and try yours next if I can figure out the 3d lack.