I found interesting item from thingiverse https://www.thingiverse.com/thing:1692823
However the STL file not slice properly in Idea Maker. (the blue slice with dark bg)
I tried with other slicer, like cura, and it's working! (yellow slice with light bg)
I wonder how to make this model slice properly in Idea maker?
any one?
Idea maker Not slice properly?
Re: Idea maker Not slice properly?
The answer is simple, the STL posted to Thingiverse has MASSIVE issues in it and is not properly ready for 3D printing. This validated by both Ideamaker and Netfabb confirming the STL has issues.
Unfortunately Ideamaker auto repair cannot fix all problems.
I had to use Netfabb online repair https://tools3d.azurewebsites.net/ and because that exports AMF files only now, use Simplify 3D since it can open an AMF and converted it back to STL.
So sure, you have a point that Ideamaker couldn't repair it natively, but that was ALSO one screwed up example of a file posted on thingiverse that nearly any slicer could and would have issues with. Now after repair it slices fine in Ideamaker. Also notice how it went from 9,685kb to now 22,638kb in size after repair to create the "missing" data.
https://www.dropbox.com/s/e41l3pr8btl9u ... d.stl?dl=0
Unfortunately Ideamaker auto repair cannot fix all problems.
I had to use Netfabb online repair https://tools3d.azurewebsites.net/ and because that exports AMF files only now, use Simplify 3D since it can open an AMF and converted it back to STL.
So sure, you have a point that Ideamaker couldn't repair it natively, but that was ALSO one screwed up example of a file posted on thingiverse that nearly any slicer could and would have issues with. Now after repair it slices fine in Ideamaker. Also notice how it went from 9,685kb to now 22,638kb in size after repair to create the "missing" data.
https://www.dropbox.com/s/e41l3pr8btl9u ... d.stl?dl=0
Re: Idea maker Not slice properly?
Here, you can see the repair file linked in my dropbox slices correctly in Ideamaker.
- Vicky@Raise3D
- Posts: 8746
- Joined: Fri Mar 25, 2016 3:54 am
Re: Idea maker Not slice properly?
Try the option Merge Internal Overlapping Parts in Other tab when slicing and check the preheat whether it works for you.
Re: Idea maker Not slice properly?
@Jetguy Thanks... for your effort!!!
@Vicky The Option "Merge Internal Overlapping Parts really do the trick!
from this we can learn something new
@Vicky The Option "Merge Internal Overlapping Parts really do the trick!
from this we can learn something new
Who is online
Users browsing this forum: No registered users and 1 guest