Any topics that don't fall into above categories. Please note that your thread may be moved to other discussion boards.
4 posts • Page 1 of 1
The Palette I ordered last May has finally come in and I want to set it up but I have a quick question that jetguy or another Palette owner might be able to help me with. If I set the Palette up on either my N2 or N2+ do I have to run single color though the Palette also or can I easily bypass it? My 2 Raise3D printers run 24/7 and I don't want the Palette getting that much abuse. I have 2 expendable modded Rep2's, Rostock max V2, and ultimaker2 that are ok but the print quality is not as good as the Raise3D's that I could put the Palette on. I welcome anyone's thought or ideas.
Thanks for the replies. Sylus, I thought about that, but I have the Bondtech set-up and I didn't want to run a multi-spliced filament through a Bowden style extruder. With the extra retraction needed with a Bowden I was worried about the stress on the splices. Jetguy, Thank you, that's what I wanted to know.
Who is online
Users browsing this forum: No registered users and 2 guests