Changing infill pattern and infill density for an individual layer

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
snlsy3D
Posts: 1
Joined: Wed Jul 11, 2018 12:11 pm

Changing infill pattern and infill density for an individual layer

Postby snlsy3D » Wed Jul 11, 2018 12:29 pm

Hey guys,

Is it possible to change the infill pattern and infill density for an individual layer? To be explained in detail;

- I want the layers having even number to be wide raster air gap and having a perimeter
- The layers having odd number to be narrow raster air gap and without a perimeter.

The image would support to understand better:

raise.JPG


In the end, I am planning to print a mold and I want the whole structure to be;

-having a smooth surface
-providing porosity to let air flow
-sturdy

The print material is gonna be ABS. Please comment any idea you think would be helpful.

User avatar
Vicky@Raise3D
Posts: 3778
Joined: Fri Mar 25, 2016 3:54 am

Re: Changing infill pattern and infill density for an individual layer

Postby Vicky@Raise3D » Thu Jul 12, 2018 2:03 am

Currently in ideaMaker you can only change the infill pattern under Per-layer settings.
The options you choose there will be changed to be the values you set under the height range you set.


Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 1 guest