Page 2 of 2

Re: IdeaMaker feature requests

Posted: Tue Dec 05, 2017 5:43 pm
by justind
Vicky@Raise3D wrote:
justind wrote:A few (hopefully easy) additional requests:

1) Shortcut key for "Lay Flat": Simplify3D uses Ctrl+L
iM1.JPG


2) "Move Up" and "Move Down" buttons for Print Settings. I've just starting using iM and it seems like the list can become long quickly.
iM2.JPG


Thanks for your suggestions!
For the second one, do you mean you want to move the sequence of printing templates?


Hi Vicky,

Yes, exactly! So that I can keep my most used templates up top, especially because the top template in the sequence seems to be the default.

Re: IdeaMaker feature requests

Posted: Wed Dec 06, 2017 12:43 am
by Gowfster
Add Ideamaker option for Support structure that is thin layer of pva at the model boundary then standard model filament from there down to build plate. Saves money by using small amount of pva

Re: IdeaMaker feature requests

Posted: Wed Dec 06, 2017 6:40 am
by Vicky@Raise3D
justind wrote:
Vicky@Raise3D wrote:
justind wrote:A few (hopefully easy) additional requests:

1) Shortcut key for "Lay Flat": Simplify3D uses Ctrl+L
iM1.JPG


2) "Move Up" and "Move Down" buttons for Print Settings. I've just starting using iM and it seems like the list can become long quickly.
iM2.JPG


Thanks for your suggestions!
For the second one, do you mean you want to move the sequence of printing templates?


Hi Vicky,

Yes, exactly! So that I can keep my most used templates up top, especially because the top template in the sequence seems to be the default.


Notes taken.
BTW, the shortcut of Lay Flat has been added in the latest beta version released last week.

Re: IdeaMaker feature requests

Posted: Wed Dec 06, 2017 6:49 am
by Vicky@Raise3D
Gowfster wrote:Add Ideamaker option for Support structure that is thin layer of pva at the model boundary then standard model filament from there down to build plate. Saves money by using small amount of pva


In ideaMaker, we have an option called Dense Support Layer, which is several layers between support structure and model with high infill ratio.
In the latest beta version of ideaMaker, you can set different extruder to complete the dense support layers' printing.

Re: IdeaMaker feature requests

Posted: Wed Jan 03, 2018 7:24 pm
by eagle1xray
yes it was basically shell quantity and density per layer. Thank you i am now trying out the new 3.0.5 ill give this a shot!

Re: IdeaMaker feature requests

Posted: Thu Jan 04, 2018 6:30 am
by Vicky@Raise3D
eagle1xray wrote:yes it was basically shell quantity and density per layer. Thank you i am now trying out the new 3.0.5 ill give this a shot!


Love to hear more thoughts from you after trying the new version.

Re: IdeaMaker feature requests

Posted: Thu Feb 08, 2018 2:45 pm
by DeX
It would be great to have a possibility to expand this list down as much as possible
and would be nice if the selected parts will be highlighted in that list ;)
scr248767.JPG



Is it convenient to choose a model from the list and go to press the arrows ?!
Easy and pleasure way is double clicking :geek:
scr246.JPG

Re: IdeaMaker feature requests

Posted: Thu Feb 08, 2018 3:08 pm
by Squenz
I for one would love to see a "Production Sheet" of the Part.

If i click on a button after the job is sliced, i can open up a window and look at the the full list of all settings of the currently used profile/slicer settings, the settings grouped in matter of sense of course. I would then click on the print button, send the report to my pdf-printer, or even save it as an pdf without printing.

I don't know if that would be feasable at all, but if i could place a "serial number" onto the part on a not so prominent place and the symbol/material name as you see on a lot of industrial fabbed plastic parts for recycling purpose, before slicing, that would be great too. After all, Ideamaker has the capabilities of repairing damaged files, maybe this feature would be possible too.

Re: IdeaMaker feature requests

Posted: Wed Mar 07, 2018 12:43 pm
by DeX
О как же оно надоело остужаться после отмены печати!!
Надо что-то подкорретировать или начать заново, так будь любезен жди ногово нагрева стола и экструдера!
Фууууууууууууууууууууууууууууууууууууууууууууууууууууууууф

Re: IdeaMaker feature requests

Posted: Tue Mar 13, 2018 3:05 pm
by NewbPilot
It would be nice to use the connection to the printer via ideamaker to EASILY rename files. Sometimes I upload a file as "XYZ Model" and want to change it to "The Perfect Fit For My Project" .. and clicking each letter on the virtual keyboard is a pain.

Re: IdeaMaker feature requests

Posted: Wed Mar 14, 2018 8:21 am
by Vicky@Raise3D
NewbPilot wrote:It would be nice to use the connection to the printer via ideamaker to EASILY rename files. Sometimes I upload a file as "XYZ Model" and want to change it to "The Perfect Fit For My Project" .. and clicking each letter on the virtual keyboard is a pain.


Notes taken.

Re: IdeaMaker feature requests

Posted: Tue May 15, 2018 9:58 am
by DeX
C'mon! It can't be changed with double clicking yet !?
Everything must be editable with double clicking.
scr1346.JPG

Re: IdeaMaker feature requests

Posted: Tue May 15, 2018 2:33 pm
by Alex M.
DeX wrote:C'mon! It can't be changed with double clicking yet !?
Everything must be editable with double clicking.
scr1346.JPG


Yes! It would be much nicer to be able to edit these settings rather than needing to delete and replace each of them. This needs to be editable for extruder temp, bed temp, and fan speed.

Re: IdeaMaker feature requests

Posted: Tue May 15, 2018 5:49 pm
by Noren
Vicky@Raise3D wrote:
DeX wrote:Guys, guys ! :idea: Here is what would be good to do: *.idea files windows explorer thumbnails !

Notes taken.


Please also add quicklook support for Mac OS X. (Preview of the idea files in the Mac OS finder.)
Look at how it shows stl-files.

Re: IdeaMaker feature requests

Posted: Tue May 15, 2018 7:59 pm
by Korni
Noren wrote:
Vicky@Raise3D wrote:
DeX wrote:Guys, guys ! :idea: Here is what would be good to do: *.idea files windows explorer thumbnails !

Notes taken.


Please also add quicklook support for Mac OS X. (Preview of the idea files in the Mac OS finder.)
Look at how it shows stl-files.


Yes for Mac OS !!!

Re: IdeaMaker feature requests

Posted: Wed May 16, 2018 5:44 am
by Vicky@Raise3D
DeX wrote:C'mon! It can't be changed with double clicking yet !?
Everything must be editable with double clicking.
scr1346.JPG


Notes taken.

Re: IdeaMaker feature requests

Posted: Wed May 16, 2018 10:39 am
by Vicky@Raise3D
Noren wrote:Please also add quicklook support for Mac OS X. (Preview of the idea files in the Mac OS finder.)
Look at how it shows stl-files.


Added into developing list.

Re: IdeaMaker feature requests

Posted: Thu May 17, 2018 10:30 pm
by mb300sd
An option to print all shells for one hole before moving to the next hole, especially nice for top layers where some of the ooze might show up.

Re: IdeaMaker feature requests

Posted: Fri May 18, 2018 10:36 am
by Vicky@Raise3D
mb300sd wrote:An option to print all shells for one hole before moving to the next hole, especially nice for top layers where some of the ooze might show up.


Already added into developing list.

Re: IdeaMaker feature requests

Posted: Sat May 19, 2018 4:55 pm
by frjez
Any chance we could see what is in "development". Posting this list would make us happier and would be more reassuring because we could see where are you heading.