Hello I'm new here and I am thinking about getting the new Raise 3D Pro 2
Due to it's size I think it would be great to be able to use 1.75mm Filament for details and 2.85mm Filament on second extruder for fast printing, for example using a 2mm nozzle, which will improve print speed drastically.
As option it would also be great to have the possibility to switch out hotends quickly, like on the Ultimaker.
What are you thinking about my idea?
best regards
Stefan
Option using 2.85mm Filament
- Stefan J. Trucker
- Posts: 14
- Joined: Sat May 26, 2018 7:28 am
- Location: Vienna
- Contact:
Option using 2.85mm Filament
Be creative, be independent, be you!
- Vicky@Raise3D
- Posts: 4815
- Joined: Fri Mar 25, 2016 3:54 am
Re: Option using 2.85mm Filament
It is not easy to modify the hardware to achieve, as not only the hot end assembling, but also extruder gear distance and throat tube inside extruder head, the whole feeding path are designed to fit with 1.75m filament.
Return to “Feature requests, ideas, wishes”
Who is online
Users browsing this forum: No registered users and 1 guest