wipewall first layer should start with 2nd (R) head

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
User avatar
walshlg
Posts: 1163
Joined: Wed Mar 23, 2016 12:01 pm

wipewall first layer should start with 2nd (R) head

Postby walshlg » Sun Aug 14, 2016 8:17 pm

One problem when printing big 2 color prints, is that the leakage from the nozzle drains the second (R) nozzle of plastic by the time its ready to print. Consequently, the first layer from the second nozzle is empty until it finally gets some extrusion going. This could be improved by starting the first layer of the wipewall with the R extruder so it acts like a skirt. After that it works well, printing 2 layers of each color and then should print the wipewall of the color (head) it is switching to before it prints that color (head).

hope this explanation is clear.

Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 1 guest