Brim/Skirt Ideas

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
Posts: 58
Joined: Thu Mar 24, 2016 12:46 am

Brim/Skirt Ideas

Postby mitchfx » Tue Mar 13, 2018 4:25 pm

A couple of quick thoughts...

1. Do we really need separate brim and skirt settings? Why not have it be one setting and you define if it's a brim by choosing 0.0mm offset.

2. Is there a way to force brim/skirt generation on the inside wall of parts that have closed interior borders? If not, please consider adding this feature.

3. Similar to #2, an option to create brims around support platform contacts would be brilliant. This would help lock them down, especially when you are not using a raft.


User avatar
Posts: 3150
Joined: Fri Mar 25, 2016 3:54 am

Re: Brim/Skirt Ideas

Postby Vicky@Raise3D » Wed Mar 14, 2018 8:57 am

1. Well, this can be discussed by more users. From us, we think for kind of Brim which is a little bit special to be defined as skirt which is common to use. Although with 0 offset they are the same. But choosing it from drop list especially for beginners.
2. We will open an option for this.
3. Do you mean that sometimes the interior support structure doesn't have brim? If possible, would you like to share a sample file for us to test?

Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 3 guests