auto-height (not auto-level)

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
Posts: 7
Joined: Tue May 02, 2017 11:20 pm

auto-height (not auto-level)

Postby AJM » Wed May 17, 2017 11:30 pm

I use various print surface, so the height has to be adjusted every time.
It would be good if the Z-stop switch is moved to above the actual print surface so that it automatically adjusts for the difference in plate thickness. Right now, it measures Z-height of the bottom of the plate which does not take the actual surface thickness into account. That would be OK for printers with non-removable bed surface, but not for Raise3D.

Moving the switch would be a relatively easy hardware change and it can be retrofit.
Auto-level would solve the problem as well, but it is not necessary for a rigidly-built printer.

Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 1 guest