Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
- Posts: 34
- Joined: Thu Mar 24, 2016 3:09 am
I'd really like to be able to buy the BuildTak FlexPlate (https://www.buildtak.com/product/buildt ... te-system/
) with a surface that matches the N2 bed. Is there any chance that Raise3D and BuildTak will provide such product? I could buy the biggest one (305x305mm) but I don't like much the idea of "wasting" ~35mm per side.
- Posts: 48
- Joined: Fri May 13, 2016 5:35 pm
Isn't the N2 print area 305x305mm? Not sure how you would be wasting 35 mm per side?
- Posts: 76
- Joined: Sun Aug 21, 2016 1:35 pm
If you need a flexible base just get the BTSN2 Build Plate, put the Buildtak on it and then use silicone pads on the corners instead of the magnetic base.
- Posts: 67
- Joined: Mon May 16, 2016 2:56 pm
Another option is a GeckoTek build plate. Its metal and has an embedded "sticky" surface.
- Posts: 934
- Joined: Wed Mar 23, 2016 12:01 pm
don't forget, you need the plate the size of the bed which is much bigger than the 305x305mm print area
- Posts: 19
- Joined: Wed Jul 27, 2016 9:14 am
Return to “Feature requests, ideas, wishes”
Who is online
Users browsing this forum: No registered users and 1 guest