Lithophane Lamp

[ABH]

As always, the Raise3D printer did a great job.
This is a Lithophane Lamp printed with 0.1 mm layer height in black and white ABS.
There's a 1.3W white LED bulb inside, giving 140 Lumen with nearly no heat, so ventilation holes were not necessary.
This is my first printed lithophane and I'm really impressed with the quality of the images.

[Jetguy]

What program or tool did you create that lamp with? Link?

[ABH]

The lamp as such is my own design. The white top with the lithophane clicks onto the bottom console with the LED bulb.
The cylindrical lithophane was created using this online service:
http://3dp.rocks/lithophane/
Lithophane thickness 4 mm, min. thickness 0.8 mm.
I "merged" stl files for the white top/bottom with the cylindrical lithophane in the slicer.

[Targo]

Great idea, thanks for the link. That will certainly be a project for me.
Maybe you could still turn the case slowly with a small drive.

Greeting Frank