olaying with coppeerfill filamentive

Show off your prints, mods, etc.
swampy
Posts: 242
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

olaying with coppeerfill filamentive

Postby swampy » Sun Mar 05, 2017 12:16 am

so i got some filamentive copper fil pla 80% copper and this was my first attempt i used a cloth buffer wheel on a bench grinder printed 195 degrees 60 bed temp and think .15mm layer settings .o.5 nozzle it looks like
16999110_1854159504837049_2057700771440505988_n.jpg
clay when first printed till you start to buff it looks a bit antique but i can comfirm if you get it buffed right and 1 coat of clear laquer the results really change
Attachments
17022187_1854159361503730_1480819000372862207_n.jpg
17021947_1854159368170396_2919537545618076773_n.jpg
17022080_1854159441503722_4252397223365611387_n.jpg
17021398_1854159358170397_2515900525898140131_n.jpg

User avatar
walshlg
Posts: 1340
Joined: Wed Mar 23, 2016 12:01 pm

Re: olaying with coppeerfill filamentive

Postby walshlg » Sun Mar 05, 2017 12:43 am

where did you get the stl?

swampy
Posts: 242
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: olaying with coppeerfill filamentive

Postby swampy » Sun Mar 05, 2017 8:40 pm



Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 3 guests