Page 1 of 1

1/20th scale model of one of our equipment lines

Posted: Mon Nov 05, 2018 10:41 pm
by GQQSER
This is a 1/20th scale model of one of our equipment lines. It was so accurate that it was used in the field construction office as a reference for the installation. If you zoom in on the top tanks you can see the jacking bolts. I used 1.4mm screws for the scaled bolts.

Edit: it stands 35" tall

Re: 1/20th scale model of one of our equipment lines

Posted: Tue Nov 06, 2018 12:28 am
by melissa.wills
Impressive build! Did you use the Pro2 series or N series for this?

Re: 1/20th scale model of one of our equipment lines

Posted: Tue Nov 06, 2018 2:52 pm
by GQQSER
This was done on the N2+ dual extruder. Curious thing, I was having a bunch of self inflicted problems with the extruders, hot ends etc. and I bought the bondtech replacement extruders. Then suddenly, the printing gods smiled upon me and everything has been printing awesome. I haven't stopped it long enough to change the extruders out.
I love my N2+ I have several parts I make and sell commercially.